On Tue 08 Sep 14:35 PDT 2015, Andy Gross wrote:
> This patch adds support and documentation for the PM8916 regulators
> found on MSM8916 platforms.
>
> Signed-off-by: Andy Gross <agross@xxxxxxxxxxxxxx>
> ---
> .../bindings/soc/qcom/qcom,smd-rpm-regulator.txt | 18 ++++++
> drivers/regulator/qcom_smd-regulator.c | 64 ++++++++++++++++++++
> 2 files changed, 82 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
> index 7084474..5c867e9 100644
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
> @@ -18,6 +18,7 @@ Regulator nodes are identified by their compatible:
> Definition: must be one of:
> "qcom,rpm-pm8841-regulators"
> "qcom,rpm-pm8941-regulators"
> + "qcom,rpm-pm8916-regulators"
>
> - vdd_s1-supply:
> - vdd_s2-supply:
> @@ -50,6 +51,19 @@ Regulator nodes are identified by their compatible:
> Definition: reference to regulator supplying the input pin, as
> described in the data sheet
>
> +- vdd_s1:
> +- vdd_s2:
> +- vdd_s3:
> +- vdd_s4:
These should end with "-supply"
> +- vdd_l1_l2_l3-supply
> +- vdd_l4_l5_l6-supply
> +- vdd_l7-supply
> +- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18:
Same here
> + Usage: optional (pm8916 only)
> + Value type: <phandle>
> + Definition: reference to regulator supplying the input pin, as
> + described in the data sheet
> +
> The regulator node houses sub-nodes for each regulator within the device. Each
> sub-node is identified using the node's name, with valid values listed for each
> of the pmics below.
> @@ -62,6 +76,10 @@ pm8941:
> l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
> lvs3, 5vs1, 5vs2
>
> +pm8916:
> + s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
> + l14, l15, l16, l17, l18
> +
> The content of each sub-node is defined by the standard binding for regulators -
> see regulator.txt.
>
> diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
[..]
> struct rpm_regulator_data {
> const char *name;
> u32 type;
> @@ -272,9 +309,36 @@ static const struct rpm_regulator_data rpm_pm8941_regulators[] = {
> {}
> };
>
> +static const struct rpm_regulator_data rpm_pm8916_regulators[] = {
As I hope we can re-use this driver for a bunch of different platforms I
think we should keep these arrays in alphabetical order - i.e. above
8941 even if there's a logical connection between the two 8x41.
> + { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8916_buck_lvo_smps, "vdd_s1" },
> + { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8916_buck_lvo_smps, "vdd_s2" },
> + { "s3", QCOM_SMD_RPM_SMPA, 3, &pm8916_buck_lvo_smps, "vdd_s3" },
> + { "s4", QCOM_SMD_RPM_SMPA, 4, &pm8916_buck_hvo_smps, "vdd_s4" },
> + { "l1", QCOM_SMD_RPM_LDOA, 1, &pm8916_nldo, "vdd_l1_l2_l3" },
> + { "l2", QCOM_SMD_RPM_LDOA, 2, &pm8916_nldo, "vdd_l1_l2_l3" },
> + { "l3", QCOM_SMD_RPM_LDOA, 3, &pm8916_nldo, "vdd_l1_l2_l3" },
> + { "l4", QCOM_SMD_RPM_LDOA, 4, &pm8916_pldo, "vdd_l4_l5_l6" },
> + { "l5", QCOM_SMD_RPM_LDOA, 5, &pm8916_pldo, "vdd_l4_l5_l6" },
> + { "l6", QCOM_SMD_RPM_LDOA, 6, &pm8916_pldo, "vdd_l4_l5_l6" },
> + { "l7", QCOM_SMD_RPM_LDOA, 7, &pm8916_pldo, "vdd_l7" },
> + { "l8", QCOM_SMD_RPM_LDOA, 8, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" },
> + { "l9", QCOM_SMD_RPM_LDOA, 9, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" },
> + { "l10", QCOM_SMD_RPM_LDOA, 10, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
> + { "l11", QCOM_SMD_RPM_LDOA, 11, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
> + { "l12", QCOM_SMD_RPM_LDOA, 12, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
> + { "l13", QCOM_SMD_RPM_LDOA, 13, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
> + { "l14", QCOM_SMD_RPM_LDOA, 14, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
> + { "l15", QCOM_SMD_RPM_LDOA, 15, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
> + { "l16", QCOM_SMD_RPM_LDOA, 16, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
> + { "l17", QCOM_SMD_RPM_LDOA, 17, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
> + { "l18", QCOM_SMD_RPM_LDOA, 18, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
> + {}
> +};
> +
> static const struct of_device_id rpm_of_match[] = {
> { .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
> { .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
> + { .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
Same here.
> {}
> };
> MODULE_DEVICE_TABLE(of, rpm_of_match);
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
