Re: [RFC PATCH 1/1] soc: qcom: Add driver to read secondary bootloader (XBL) log

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Srinivas,

On 8/22/2023 7:11 PM, Srinivas Kandagatla wrote:


On 22/08/2023 13:15, Ninad Naik wrote:
Qualcomm secondary bootloader (XBL) boot log holds information to
identify various firmware configuration currently set on the SoC.
The XBL log is stored in a predefined reserved memory region.

This drivers provides a way to print XBL logs on the console. To
do so, it provides a debugfs entry which captures the logs stored
in this reserved memory region. This entry can now be used to read
and print the XBL logs to console.

User can use the below command to print XBL log to console:
         cat /sys/kernel/debug/xbl_log

Signed-off-by: Ninad Naik <quic_ninanaik@xxxxxxxxxxx>
---
  drivers/soc/qcom/Kconfig        |  13 +++
  drivers/soc/qcom/Makefile       |   1 +
  drivers/soc/qcom/dump_xbl_log.c | 139 ++++++++++++++++++++++++++++++++
  3 files changed, 153 insertions(+)
  create mode 100644 drivers/soc/qcom/dump_xbl_log.c

diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 715348869d04..4489d37e924d 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -291,4 +291,17 @@ config QCOM_INLINE_CRYPTO_ENGINE
      tristate
      select QCOM_SCM
+config QCOM_DUMP_XBL_LOG
+    tristate "Qualcomm driver to print XBL logs on console from debugfs"
+    help
+      This driver is used to capture secondary bootloader (xbl) log
+      from a reserved memory region and provide a debugfs entry to read
+      logs captured from this memory region and print them on console.
+      User can use below command to print the xbl log on console:
+
+                cat /sys/kernel/debug/xbl_log
+
+      These logs help to identify firmware configuration information on
+      the SoC. The name of the built module will be dump_xbl_log
+
  endmenu
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index bbca2e1e55bb..aac088a1a0b6 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -32,3 +32,4 @@ obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o
  obj-$(CONFIG_QCOM_ICC_BWMON)    += icc-bwmon.o
  qcom_ice-objs            += ice.o
  obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE)    += qcom_ice.o
+obj-$(CONFIG_QCOM_DUMP_XBL_LOG)    += dump_xbl_log.o
diff --git a/drivers/soc/qcom/dump_xbl_log.c b/drivers/soc/qcom/dump_xbl_log.c
new file mode 100644
index 000000000000..ea335a5e660b
--- /dev/null
+++ b/drivers/soc/qcom/dump_xbl_log.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/memblock.h>
+#include <linux/of_address.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+
+struct xbl_log_data {
+    struct device *dev;
+    size_t buf_size;
+    void __iomem *xbl_buf;
+    struct dentry *dbg_file;
+    struct debugfs_blob_wrapper dbg_data;
+};
+
+static int map_addr_range(struct device_node **parent, const char *name,
+              struct xbl_log_data *xbl_data)
+{
+    struct device_node *node;
+    struct resource res;
+    int ret;
+
+    node = of_find_node_by_name(*parent, name);
+    if (!node)
+        return -ENODEV;
+
+    ret = of_address_to_resource(node, 0, &res);
+    if (ret) {
+        dev_err(xbl_data->dev, "Failed to parse memory region\n");
+        return ret;
+    }
+    of_node_put(node);
+
+    if (!resource_size(&res)) {
+        dev_err(xbl_data->dev, "Failed to parse memory region size\n");
+        return -ENODEV;
+    }
+
+    xbl_data->buf_size = resource_size(&res) - 1;
+    xbl_data->xbl_buf = devm_memremap(xbl_data->dev, res.start,
+                      xbl_data->buf_size, MEMREMAP_WB);
+    if (!xbl_data->xbl_buf) {
+        dev_err(xbl_data->dev, "%s: memory remap failed\n", name);
+        return -ENOMEM;
+    }
+
+    return 0;
+}
+
+static int xbl_log_probe(struct platform_device *pdev)
+{
+    struct device *dev = &pdev->dev;
+    struct xbl_log_data *xbl_data;
+    struct device_node *parent;
+    int ret;
+
+    xbl_data = devm_kzalloc(dev, sizeof(*xbl_data), GFP_KERNEL);
+    if (!xbl_data)
+        return -ENOMEM;
+
+    xbl_data->dev = &pdev->dev;
+    platform_set_drvdata(pdev, xbl_data);
+
+    parent = of_find_node_by_path("/reserved-memory");
+    if (!parent) {
+        dev_err(xbl_data->dev, "reserved-memory node missing\n");
+        return -ENODEV;
+    }
+
+    ret = map_addr_range(&parent, "uefi-log", xbl_data);

This driver really needs a proper device tree bindings, rather than parsing the device tree manually here in the driver.

Pl look at ./Documentation/devicetree/bindings/reserved-memory/qcom*

This should also help you getting rid of all these parsing code.

--srini

Ack. I'll add a device tree binding and make corresponding fixes without the parsing and device registration, taking this link as well as Pavan's suggestion of adding the compatible entry to the reserved_mem_matches table in consideration. Thank you.>

+    if (ret)
+        goto put_node;
+
+    xbl_data->dbg_data.data = xbl_data->xbl_buf;
+    xbl_data->dbg_data.size = xbl_data->buf_size;
+    xbl_data->dbg_file = debugfs_create_blob("xbl_log", 0400, NULL,
+                         &xbl_data->dbg_data);
+    if (IS_ERR(xbl_data->dbg_file)) {
+        dev_err(xbl_data->dev, "failed to create debugfs entry\n");
+        ret = PTR_ERR(xbl_data->dbg_file);
+    }
+
+put_node:
+    of_node_put(parent);
+    return ret;
+}
+
+static int xbl_log_remove(struct platform_device *pdev)
+{
+    struct xbl_log_data *xbl_data = platform_get_drvdata(pdev);
+
+    debugfs_remove_recursive(xbl_data->dbg_file);
+    return 0;
+}
+
+static struct platform_driver xbl_log_driver = {
+    .probe = xbl_log_probe,
+    .remove = xbl_log_remove,
+    .driver = {
+           .name = "xbl-log",
+           },
+};
+
+static struct platform_device xbl_log_device = {
+    .name = "xbl-log",
+};
+
+static int __init xbl_log_init(void)
+{
+    int ret = 0;
+
+    ret = platform_driver_register(&xbl_log_driver);
+    if (!ret) {
+        ret = platform_device_register(&xbl_log_device);
+        if (ret)
+            platform_driver_unregister(&xbl_log_driver);
+    }
+    return ret;
+}
+
+static void __exit xbl_log_exit(void)
+{
+    platform_device_unregister(&xbl_log_device);
+    platform_driver_unregister(&xbl_log_driver);
+}
+
+module_init(xbl_log_init);
+module_exit(xbl_log_exit);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. (QTI) XBL log driver");
+MODULE_LICENSE("GPL");

Thanks,
Ninad



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux