[PATCH v3 03/32] dt-bindings: bus: convert qcom,ssbi schema to YAML format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert arm/msm/ssbi.txt yo YAML, moving it to the directory with bus
bindings.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 .../devicetree/bindings/arm/msm/ssbi.txt      | 18 ------
 .../devicetree/bindings/bus/qcom,ssbi.yaml    | 63 +++++++++++++++++++
 2 files changed, 63 insertions(+), 18 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/msm/ssbi.txt
 create mode 100644 Documentation/devicetree/bindings/bus/qcom,ssbi.yaml

diff --git a/Documentation/devicetree/bindings/arm/msm/ssbi.txt b/Documentation/devicetree/bindings/arm/msm/ssbi.txt
deleted file mode 100644
index 54fd5ced3401..000000000000
--- a/Documentation/devicetree/bindings/arm/msm/ssbi.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Qualcomm SSBI
-
-Some Qualcomm MSM devices contain a point-to-point serial bus used to
-communicate with a limited range of devices (mostly power management
-chips).
-
-These require the following properties:
-
-- compatible: "qcom,ssbi"
-
-- qcom,controller-type
-  indicates the SSBI bus variant the controller should use to talk
-  with the slave device.  This should be one of "ssbi", "ssbi2", or
-  "pmic-arbiter".  The type chosen is determined by the attached
-  slave.
-
-The slave device should be the single child node of the ssbi device
-with a compatible field.
diff --git a/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml b/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml
new file mode 100644
index 000000000000..693cfa9696b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/qcom,ssbi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Single-wire Serial Bus Interface (SSBI)
+
+description:
+  Some Qualcomm MSM devices contain a point-to-point serial bus used to
+  communicate with a limited range of devices (mostly power management
+  chips).
+
+maintainers:
+  - Andy Gross <agross@xxxxxxxxxx>
+  - Bjorn Andersson <andersson@xxxxxxxxxx>
+
+properties:
+  compatible:
+    const: qcom,ssbi
+
+  reg:
+    maxItems: 1
+
+  qcom,controller-type:
+    description:
+      Indicates the SSBI bus variant the controller should use to talk
+      with the slave device. The type chosen is determined by the attached
+      slave.
+    enum:
+      - ssbi
+      - ssbi2
+      - pmic-arbiter
+
+  pmic:
+    $ref: /schemas/mfd/qcom-pm8xxx.yaml#
+
+required:
+  - compatible
+  - reg
+  - qcom,controller-type
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    ssbi@c00000 {
+        compatible = "qcom,ssbi";
+        reg = <0x00c00000 0x1000>;
+        qcom,controller-type = "pmic-arbiter";
+
+        pmic {
+            compatible = "qcom,pm8821";
+            interrupt-parent = <&msmgpio>;
+            interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
+            #interrupt-cells = <2>;
+            interrupt-controller;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+...
-- 
2.39.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux