On Wed, Aug 16, 2023 at 08:15:54AM +0200, Krzysztof Kozlowski wrote: > On 15/08/2023 15:59, Robert Marko wrote: > > IPQ5018 has SDI (Secure Debug Image) enabled by TZ by default, and that > > means that WDT being asserted or just trying to reboot will hang the board > > in the debug mode and only pulling the power and repowering will help. > > Some IPQ4019 boards like Google WiFI have it enabled as well. > > > > So, lets add a boolean property to indicate that SDI should be disabled. > > > > Signed-off-by: Robert Marko <robimarko@xxxxxxxxx> > > --- > > Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml > > index 4233ea839bfc..bf753192498a 100644 > > --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml > > +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml > > @@ -89,6 +89,14 @@ properties: > > protocol to handle sleeping SCM calls. > > maxItems: 1 > > > > + qcom,sdi-disable: > > The property should describe rather current hardware/firmware state, > instead of expressing your intention for OS what to do. Therefore rather: > qcom,sdi-enabled > or > qcom,secure-debug-image Why can't you just disable SDI unconditionally when going into debug mode? Is doing that when not enabled going to crash the system or something? Rob
