[PATCH v3 17/18] arm64: dts: qcom: sm8450: switch PCIe QMP PHY to new style of bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes). As a part of this conversion also
change the "refgen" name to more correct "rchng".

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 82 ++++++++++++----------------
 1 file changed, 35 insertions(+), 47 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 8ccad9e00265..eafd867ee9c4 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -750,8 +750,8 @@ gcc: clock-controller@100000 {
 			#power-domain-cells = <1>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&sleep_clk>,
-				 <&pcie0_lane>,
-				 <&pcie1_lane>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
 				 <0>,
 				 <&ufs_mem_phy 0>,
 				 <&ufs_mem_phy 1>,
@@ -1780,7 +1780,7 @@ pcie0: pci@1c00000 {
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
-				 <&pcie0_lane>,
+				 <&pcie0_phy>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -1811,7 +1811,7 @@ pcie0: pci@1c00000 {
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 
-			phys = <&pcie0_lane>;
+			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
 			perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -1825,15 +1825,23 @@ pcie0: pci@1c00000 {
 
 		pcie0_phy: phy@1c06000 {
 			compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
-			reg = <0 0x01c06000 0 0x200>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c06000 0 0x2000>;
+
 			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_EN>,
-				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			clock-output-names = "pcie_0_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
 			reset-names = "phy";
@@ -1842,19 +1850,6 @@ pcie0_phy: phy@1c06000 {
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie0_lane: phy@1c06200 {
-				reg = <0 0x01c06e00 0 0x200>, /* tx */
-				      <0 0x01c07000 0 0x200>, /* rx */
-				      <0 0x01c06200 0 0x200>, /* pcs */
-				      <0 0x01c06600 0 0x200>; /* pcs_pcie */
-				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clock-output-names = "pcie_0_pipe_clk";
-			};
 		};
 
 		pcie1: pci@1c08000 {
@@ -1894,7 +1889,7 @@ pcie1: pci@1c08000 {
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
-				 <&pcie1_lane>,
+				 <&pcie1_phy>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -1923,7 +1918,7 @@ pcie1: pci@1c08000 {
 
 			power-domains = <&gcc PCIE_1_GDSC>;
 
-			phys = <&pcie1_lane>;
+			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
 			perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
@@ -1935,17 +1930,25 @@ pcie1: pci@1c08000 {
 			status = "disabled";
 		};
 
-		pcie1_phy: phy@1c0f000 {
+		pcie1_phy: phy@1c0e000 {
 			compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy";
-			reg = <0 0x01c0f000 0 0x200>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c0e000 0 0x2000>;
+
 			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_1_CLKREF_EN>,
-				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			clock-output-names = "pcie_1_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
 			reset-names = "phy";
@@ -1954,21 +1957,6 @@ pcie1_phy: phy@1c0f000 {
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie1_lane: phy@1c0e000 {
-				reg = <0 0x01c0e000 0 0x200>, /* tx */
-				      <0 0x01c0e200 0 0x300>, /* rx */
-				      <0 0x01c0f200 0 0x200>, /* pcs */
-				      <0 0x01c0e800 0 0x200>, /* tx */
-				      <0 0x01c0ea00 0 0x300>, /* rx */
-				      <0 0x01c0f400 0 0xc00>; /* pcs_pcie */
-				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clock-output-names = "pcie_1_pipe_clk";
-			};
 		};
 
 		config_noc: interconnect@1500000 {
-- 
2.39.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux