Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 30 ++++++++++++--------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 62e594a0451a..30d8730fa4de 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -945,7 +945,7 @@ pcie0: pci@1c00000 { #address-cells = <3>; #size-cells = <2>; num-lanes = <1>; - phys = <&pciephy>; + phys = <&pcie_phy>; phy-names = "pciephy"; status = "disabled"; @@ -975,32 +975,28 @@ pcie0: pci@1c00000 { pcie_phy: phy@1c06000 { compatible = "qcom,msm8998-qmp-pcie-phy"; - reg = <0x01c06000 0x18c>; - #address-cells = <1>; - #size-cells = <1>; + reg = <0x01c06000 0x1000>; status = "disabled"; - ranges; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; + <&gcc GCC_PCIE_CLKREF_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk_src"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>; reset-names = "phy", "common"; vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; - - pciephy: phy@1c06800 { - reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>; - #phy-cells = <0>; - - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "pcie_0_pipe_clk_src"; - #clock-cells = <0>; - }; }; ufshc: ufshc@1da4000 { -- 2.39.2