[PATCH v1] PCI: qcom: Add sysfs entry to change link speed dynamically

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



PCIe can operate on lower GEN speed if client decided based upon
the bandwidth & latency requirements. To support dynamic GEN speed
switch adding this sysfs support.

To change the GEN speed the link should be in L0, so first disable
L0s & L1.

L0s needs to be disabled at both RC & EP because L0s entry is
independent. For enabling L0s both ends of the link needs to support
it, so first check if L0s is supported on both ends and then enable
L0s.

This patch is dependent on "PCI: qcom: Add support for OPP"
https://lore.kernel.org/linux-arm-msm/1692192264-18515-1-git-send-email-quic_krichai@xxxxxxxxxxx/T/#t

Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 141 +++++++++++++++++++++++++++++++++
 1 file changed, 141 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 831d158..ad67d17 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -241,10 +241,150 @@ struct qcom_pcie {
 	const struct qcom_pcie_cfg *cfg;
 	struct dentry *debugfs;
 	bool suspended;
+	bool l0s_supported;
 };
 
 #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
 
+static void qcom_pcie_icc_update(struct qcom_pcie *pcie);
+static void qcom_pcie_opp_update(struct qcom_pcie *pcie);
+
+static int qcom_pcie_disable_l0s(struct pci_dev *pdev, void *userdata)
+{
+	int lnkctl;
+
+	pci_read_config_dword(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCTL, &lnkctl);
+	lnkctl &= ~(PCI_EXP_LNKCTL_ASPM_L0S);
+	pci_write_config_word(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCTL, lnkctl);
+
+	return 0;
+}
+
+static int qcom_pcie_check_l0s_support(struct pci_dev *pdev, void *userdata)
+{
+	struct pci_dev *parent = pdev->bus->self;
+	struct qcom_pcie *pcie = userdata;
+	struct dw_pcie *pci = pcie->pci;
+	int lnkcap;
+
+	 /* check parent supports L0s */
+	if (parent) {
+		dev_err(pci->dev, "parent\n");
+		pci_read_config_dword(parent, pci_pcie_cap(parent) + PCI_EXP_LNKCAP,
+				  &lnkcap);
+		if (!(lnkcap & PCI_EXP_LNKCAP_ASPM_L0S)) {
+			dev_info(pci->dev, "Parent does not support L0s\n");
+			pcie->l0s_supported = false;
+			return 0;
+		}
+	}
+
+	pci_read_config_dword(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCAP,
+			  &lnkcap);
+	dev_err(pci->dev, "child %x\n", lnkcap);
+	if (!(lnkcap & PCI_EXP_LNKCAP_ASPM_L0S)) {
+		dev_info(pci->dev, "Device does not support L0s\n");
+		pcie->l0s_supported = false;
+		return 0;
+	}
+
+	return 0;
+}
+
+static int qcom_pcie_enable_l0s(struct pci_dev *pdev, void *userdata)
+{
+	int lnkctl;
+
+	pci_read_config_dword(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCTL, &lnkctl);
+	lnkctl |= (PCI_EXP_LNKCTL_ASPM_L0S);
+	pci_write_config_word(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCTL, lnkctl);
+
+	return 0;
+}
+
+static ssize_t qcom_pcie_speed_change_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf,
+			       size_t count)
+{
+	unsigned int current_speed, target_speed, max_speed;
+	struct qcom_pcie *pcie = dev_get_drvdata(dev);
+	struct pci_bus *child, *root_bus = NULL;
+	struct dw_pcie_rp *pp = &pcie->pci->pp;
+	struct dw_pcie *pci = pcie->pci;
+	struct pci_dev *pdev;
+	u16 offset;
+	u32 val;
+	int ret;
+
+	list_for_each_entry(child, &pp->bridge->bus->children, node) {
+		if (child->parent == pp->bridge->bus) {
+			root_bus = child;
+			break;
+		}
+	}
+
+	pdev = root_bus->self;
+
+	offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+
+	val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
+	max_speed = FIELD_GET(PCI_EXP_LNKCAP_SLS, val);
+
+	val = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
+	current_speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, val);
+
+	ret = kstrtouint(buf, 10, &target_speed);
+	if (ret)
+		return ret;
+
+	if (target_speed > max_speed)
+		return -EINVAL;
+
+	if (current_speed == target_speed)
+		return count;
+
+	pci_walk_bus(pp->bridge->bus, qcom_pcie_disable_l0s, pcie);
+
+	/* Disable L1 */
+	val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL);
+	val &= ~(PCI_EXP_LNKCTL_ASPM_L1);
+	dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCTL, val);
+
+	/* Set target GEN speed */
+	val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL2);
+	val &= ~PCI_EXP_LNKCTL2_TLS;
+	dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCTL2, val | target_speed);
+
+	ret = pcie_retrain_link(pdev, true);
+	if (ret)
+		dev_err(dev, "Link retrain failed %d\n", ret);
+
+	/* Enable L1 */
+	val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL);
+	val |= (PCI_EXP_LNKCTL_ASPM_L1);
+	dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCTL, val);
+
+	pcie->l0s_supported = true;
+	pci_walk_bus(pp->bridge->bus, qcom_pcie_check_l0s_support, pcie);
+
+	if (pcie->l0s_supported)
+		pci_walk_bus(pp->bridge->bus, qcom_pcie_enable_l0s, pcie);
+
+	qcom_pcie_icc_update(pcie);
+
+	qcom_pcie_opp_update(pcie);
+
+	return count;
+}
+static DEVICE_ATTR_WO(qcom_pcie_speed_change);
+
+static struct attribute *qcom_pcie_attrs[] = {
+	&dev_attr_qcom_pcie_speed_change.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(qcom_pcie);
+
 static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
 {
 	gpiod_set_value_cansleep(pcie->reset, 1);
@@ -1716,6 +1856,7 @@ static struct platform_driver qcom_pcie_driver = {
 		.of_match_table = qcom_pcie_match,
 		.pm = &qcom_pcie_pm_ops,
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.dev_groups = qcom_pcie_groups,
 	},
 };
 builtin_platform_driver(qcom_pcie_driver);
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux