[PATCH v3 4/4] arm64: dts: qcom: ipq5018: indicate that SDI should be disabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Now that SCM has support for indicating that SDI has been enabled by
default, lets set the property so SCM disables it during probing.

Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
---
Changes in v3:
* Use the new boolean property
---
 arch/arm64/boot/dts/qcom/ipq5018.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 9f13d2dcdfd5..bd0198aaf8d0 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -57,6 +57,7 @@ L2_0: l2-cache {
 	firmware {
 		scm {
 			compatible = "qcom,scm-ipq5018", "qcom,scm";
+			qcom,sdi-enabled;
 		};
 	};
 
-- 
2.41.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux