On Wed, 16 Aug 2023 at 16:25, Krishna chaitanya chundru
<quic_krichai@xxxxxxxxxxx> wrote:
>
> PCIe needs to choose the appropriate performance state of RPMH power
> domain based upon the PCIe gen speed.
>
> So let's add the OPP table support to specify RPMH performance states.
>
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sm8450.dtsi | 47 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 595533a..c77a683 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -1803,7 +1803,28 @@
> pinctrl-names = "default";
> pinctrl-0 = <&pcie0_default_state>;
>
> + operating-points-v2 = <&pcie0_opp_table>;
> +
> status = "disabled";
> +
> + pcie0_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-2500000 {
As a random suggestion: these frequencies are calculated by the
driver. It might be easier to use opp-level for the PCIe generation
instead.
This way this OPP entry can become:
opp-1 {
opp-level = <1>;
required-opps = <&rpmhpd_opp_low_svs>;
};
> + opp-hz = /bits/ 64 <2500000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-5000000 {
> + opp-hz = /bits/ 64 <5000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-8000000 {
> + opp-hz = /bits/ 64 <8000000>;
> + required-opps = <&rpmhpd_opp_nom>;
> + };
> + };
> };
>
> pcie0_phy: phy@1c06000 {
> @@ -1915,7 +1936,33 @@
> pinctrl-names = "default";
> pinctrl-0 = <&pcie1_default_state>;
>
> + operating-points-v2 = <&pcie1_opp_table>;
> +
> status = "disabled";
> +
> + pcie1_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-2500000 {
> + opp-hz = /bits/ 64 <2500000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-5000000 {
> + opp-hz = /bits/ 64 <5000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-8000000 {
> + opp-hz = /bits/ 64 <8000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-16000000 {
> + opp-hz = /bits/ 64 <16000000>;
> + required-opps = <&rpmhpd_opp_nom>;
> + };
> + };
> };
>
> pcie1_phy: phy@1c0f000 {
> --
> 2.7.4
>
--
With best wishes
Dmitry
