Re: [PATCH v1 2/3] arm64: dts: qcom: sm8450: Add opp table support to PCIe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16.08.2023 09:05, Pavan Kondeti wrote:
> On Tue, Aug 15, 2023 at 05:56:47PM +0530, Krishna chaitanya chundru wrote:
>> PCIe needs to choose the appropriate performance state of RPMH power
>> domain based upon the PCIe gen speed.
>>
>> So, let's add the OPP table support to specify RPMH performance states.
>>
>> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
>> ---
>>  arch/arm64/boot/dts/qcom/sm8450.dtsi | 47 ++++++++++++++++++++++++++++++++++++
>>  1 file changed, 47 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
>> index 595533a..681ea9c 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
>> @@ -381,6 +381,49 @@
>>  		};
>>  	};
>>  
>> +	pcie0_opp_table: opp-table-pcie0 {
>> +		compatible = "operating-points-v2";
>> +
>> +		opp-2500000 {
>> +			opp-hz = /bits/ 64 <2500000>;
>> +			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>> +		};
>> +
>> +		opp-5000000 {
>> +			opp-hz = /bits/ 64 <5000000>;
>> +			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>> +		};
>> +
>> +		opp-8000000 {
>> +			opp-hz = /bits/ 64 <8000000>;
>> +			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>> +		};
>> +	};
>> +
>> +	pcie1_opp_table: opp-table-pcie1 {
>> +		compatible = "operating-points-v2";
>> +
>> +		opp-2500000 {
>> +			opp-hz = /bits/ 64 <2500000>;
>> +			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>> +		};
>> +
>> +		opp-5000000 {
>> +			opp-hz = /bits/ 64 <5000000>;
>> +			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>> +		};
>> +
>> +		opp-8000000 {
>> +			opp-hz = /bits/ 64 <8000000>;
>> +			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>> +		};
>> +
>> +		opp-16000000 {
>> +			opp-hz = /bits/ 64 <16000000>;
>> +			opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>> +		};
>> +	};
>> +
> 
> Should not we using required-opps property to pass the
> rpmhpd_opp_xxx phandle so that when this OPP is selected based on your
> clock rate, the appropriate OPP (voltage) would be selected on the RPMH side?
Yes, opp-level is for opp providers.

Konrad



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux