Some SoC-s like IPQ5018 require SDI(Secure Debug Image) to be disabled
before trying to reboot, otherwise board will just hang after reboot has
been issued via PSCI.
So, provide a call to SCM that allows disabling it.
Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
Acked-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
---
drivers/firmware/qcom_scm.c | 23 +++++++++++++++++++++++
drivers/firmware/qcom_scm.h | 1 +
2 files changed, 24 insertions(+)
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 06fe8aca870d..abb54df663ea 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -403,6 +403,29 @@ int qcom_scm_set_remote_state(u32 state, u32 id)
}
EXPORT_SYMBOL_GPL(qcom_scm_set_remote_state);
+static int qcom_scm_disable_sdi(void)
+{
+ int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_SDI_CONFIG,
+ .args[0] = 1, /* Disable watchdog debug */
+ .args[1] = 0, /* Disable SDI */
+ .arginfo = QCOM_SCM_ARGS(2),
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+
+ ret = qcom_scm_clk_enable();
+ if (ret)
+ return ret;
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+ qcom_scm_clk_disable();
+
+ return ret ? : res.result[0];
+}
+
static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
{
struct qcom_scm_desc desc = {
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index e6e512bd57d1..7b68fa820495 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -80,6 +80,7 @@ extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
#define QCOM_SCM_SVC_BOOT 0x01
#define QCOM_SCM_BOOT_SET_ADDR 0x01
#define QCOM_SCM_BOOT_TERMINATE_PC 0x02
+#define QCOM_SCM_BOOT_SDI_CONFIG 0x09
#define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10
#define QCOM_SCM_BOOT_SET_ADDR_MC 0x11
#define QCOM_SCM_BOOT_SET_REMOTE_STATE 0x0a
--
2.41.0
