The Qualcomm LPASS LPI pin controller driver uses one lock for guarding
Read-Modify-Write code for slew rate registers. However the pin
configuration and muxing registers have exactly the same RMW code but
are not protected.
Pin controller framework does not provide locking here, thus it is
possible to trigger simultaneous change of pin configuration registers
resulting in non-atomic changes.
Protect from concurrent access by re-using the same lock used to cover
the slew rate register. Using the same lock instead of adding second
one will make more sense, once we add support for newer Qualcomm SoC,
where slew rate is configured in the same register as pin
configuration/muxing.
Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
index e5a418026ba3..0b2839d27fd6 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -32,7 +32,8 @@ struct lpi_pinctrl {
char __iomem *tlmm_base;
char __iomem *slew_base;
struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
- struct mutex slew_access_lock;
+ /* Protects from concurrent register updates */
+ struct mutex lock;
DECLARE_BITMAP(ever_gpio, MAX_NR_GPIO);
const struct lpi_pinctrl_variant_data *data;
};
@@ -103,6 +104,7 @@ static int lpi_gpio_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
if (WARN_ON(i == g->nfuncs))
return -EINVAL;
+ mutex_lock(&pctrl->lock);
val = lpi_gpio_read(pctrl, pin, LPI_GPIO_CFG_REG);
/*
@@ -128,6 +130,7 @@ static int lpi_gpio_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
u32p_replace_bits(&val, i, LPI_GPIO_FUNCTION_MASK);
lpi_gpio_write(pctrl, pin, LPI_GPIO_CFG_REG, val);
+ mutex_unlock(&pctrl->lock);
return 0;
}
@@ -233,14 +236,14 @@ static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
if (slew_offset == LPI_NO_SLEW)
break;
- mutex_lock(&pctrl->slew_access_lock);
+ mutex_lock(&pctrl->lock);
sval = ioread32(pctrl->slew_base + LPI_SLEW_RATE_CTL_REG);
sval &= ~(LPI_SLEW_RATE_MASK << slew_offset);
sval |= arg << slew_offset;
iowrite32(sval, pctrl->slew_base + LPI_SLEW_RATE_CTL_REG);
- mutex_unlock(&pctrl->slew_access_lock);
+ mutex_unlock(&pctrl->lock);
break;
default:
return -EINVAL;
@@ -256,6 +259,7 @@ static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
lpi_gpio_write(pctrl, group, LPI_GPIO_VALUE_REG, val);
}
+ mutex_lock(&pctrl->lock);
val = lpi_gpio_read(pctrl, group, LPI_GPIO_CFG_REG);
u32p_replace_bits(&val, pullup, LPI_GPIO_PULL_MASK);
@@ -264,6 +268,7 @@ static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
u32p_replace_bits(&val, output_enabled, LPI_GPIO_OE_MASK);
lpi_gpio_write(pctrl, group, LPI_GPIO_CFG_REG, val);
+ mutex_unlock(&pctrl->lock);
return 0;
}
@@ -461,7 +466,7 @@ int lpi_pinctrl_probe(struct platform_device *pdev)
pctrl->chip.label = dev_name(dev);
pctrl->chip.can_sleep = false;
- mutex_init(&pctrl->slew_access_lock);
+ mutex_init(&pctrl->lock);
pctrl->ctrl = devm_pinctrl_register(dev, &pctrl->desc, pctrl);
if (IS_ERR(pctrl->ctrl)) {
@@ -483,7 +488,7 @@ int lpi_pinctrl_probe(struct platform_device *pdev)
return 0;
err_pinctrl:
- mutex_destroy(&pctrl->slew_access_lock);
+ mutex_destroy(&pctrl->lock);
clk_bulk_disable_unprepare(MAX_LPI_NUM_CLKS, pctrl->clks);
return ret;
@@ -495,7 +500,7 @@ int lpi_pinctrl_remove(struct platform_device *pdev)
struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev);
int i;
- mutex_destroy(&pctrl->slew_access_lock);
+ mutex_destroy(&pctrl->lock);
clk_bulk_disable_unprepare(MAX_LPI_NUM_CLKS, pctrl->clks);
for (i = 0; i < pctrl->data->npins; i++)
--
2.34.1
