Add SW support for the vibrator module inside PMI632, PM7250B, PM7325B, PM7550BA.
It is very similar to the vibrator module inside PM8916 which is supported in
pm8xxx-vib driver but just the drive amplitude is controlled with 2 registers,
and the register base offset in each PMIC is different.
Changes in v5:
1. Drop "qcom,spmi-vib-gen2" generic compatible string as requested
and use device specific compatible strings only.
Changes in v4:
1. Update to use the combination of the HW type and register offset
as the constant match data, the register base address defined in
'reg' property will be added when accessing SPMI registers using
regmap APIs.
2. Remove 'qcom,spmi-vib-gen1' generic compatible string.
Changes in v3:
1. Refactor the driver to support different type of the vibrators with
better flexibility by introducing the HW type with corresponding
register fields definitions.
2. Add 'qcom,spmi-vib-gen1' and 'qcom,spmi-vib-gen2' compatible
strings, and add PMI632, PM7250B, PM7325B, PM7550BA as compatbile as
spmi-vib-gen2.
Changes in v2:
Remove the "pm7550ba-vib" compatible string as it's compatible with pm7325b.
Fenglin Wu (3):
input: pm8xxx-vib: refactor to easily support new SPMI vibrator
dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module
input: pm8xxx-vibrator: add new SPMI vibrator support
.../bindings/input/qcom,pm8xxx-vib.yaml | 15 +-
drivers/input/misc/pm8xxx-vibrator.c | 171 ++++++++++++------
2 files changed, 131 insertions(+), 55 deletions(-)
--
2.25.1
