qca8xxx is 4 * 2.5GBaseT ports chip, working as switch mode named by qca8386, or working as PHY mode named by qca8084, clock hardware reigster is accessed by MDIO bus. This patch series add the clock controller of qca8363/qca8084, and add the clock ops clk_branch2_mdio_ops to avoid spin lock used during the clock operation of qca8k clock controller where the sleep happens when accessing clock control register by MDIO bus. Changes in v2: * remove clock flag CLK_ENABLE_MUTEX_LOCK. * add clock ops clk_branch2_qca8k_ops. * improve yaml file for fixing dtschema warnings. * enable clock controller driver in defconfig. Changes in v3: * rename clk_branch2_qca8k_ops to clk_branch2_mdio_ops. * fix review comments on yaml file. * use dev_err_probe on driver probe error. * only use the compatible "qcom,qca8084-nsscc". * remove enable clock controller driver patch. Luo Jie (3): clk: qcom: branch: Add clk_branch2_mdio_ops dt-bindings: clock: add qca8386/qca8084 clock and reset definitions clk: qcom: add clock controller driver for qca8386/qca8084 .../bindings/clock/qcom,qca8k-nsscc.yaml | 79 + drivers/clk/qcom/Kconfig | 8 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/clk-branch.c | 8 + drivers/clk/qcom/clk-branch.h | 2 + drivers/clk/qcom/nsscc-qca8k.c | 2180 +++++++++++++++++ include/dt-bindings/clock/qcom,qca8k-nsscc.h | 101 + include/dt-bindings/reset/qcom,qca8k-nsscc.h | 75 + 8 files changed, 2454 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml create mode 100644 drivers/clk/qcom/nsscc-qca8k.c create mode 100644 include/dt-bindings/clock/qcom,qca8k-nsscc.h create mode 100644 include/dt-bindings/reset/qcom,qca8k-nsscc.h base-commit: 29afcd69672a4e3d8604d17206d42004540d6d5c -- 2.17.1
