The ECPRI clock controller support for QDU1000 and QRU1000. The clock controller has a special branch which requires an additional memory to be enabled/disabled before the branch ops. Imran Shaik (3): dt-bindings: clock: qcom: Add ECPRICC clocks for QDU1000 and QRU1000 clk: qcom: Add ECPRICC driver support for QDU1000 and QRU1000 arm64: dts: qcom: qdu1000: Add ECPRI clock controller Taniya Das (1): clk: qcom: branch: Add mem ops support for branch2 clocks .../bindings/clock/qcom,qdu1000-ecpricc.yaml | 68 + arch/arm64/boot/dts/qcom/qdu1000.dtsi | 14 + drivers/clk/qcom/Kconfig | 8 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/clk-branch.c | 38 + drivers/clk/qcom/clk-branch.h | 4 + drivers/clk/qcom/ecpricc-qdu1000.c | 3808 +++++++++++++++++ .../dt-bindings/clock/qcom,qdu1000-ecpricc.h | 192 + 8 files changed, 4133 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/qcom,qdu1000-ecpricc.yaml create mode 100644 drivers/clk/qcom/ecpricc-qdu1000.c create mode 100644 include/dt-bindings/clock/qcom,qdu1000-ecpricc.h -- 2.25.1
