Re: [PATCH v3 2/4] drm/msm/dpu: Enable widebus for DSI INTF

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 8/2/2023 11:20 AM, Dmitry Baryshkov wrote:
On Wed, 2 Aug 2023 at 21:09, Jessica Zhang <quic_jesszhan@xxxxxxxxxxx> wrote:

DPU supports a data-bus widen mode for DSI INTF.

Enable this mode for all supported chipsets if widebus is enabled for DSI.

Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
---
  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c          | 11 ++++++++---
  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c |  4 +++-
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c          |  3 +++
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h          |  1 +
  drivers/gpu/drm/msm/msm_drv.h                        |  6 +++++-
  5 files changed, 20 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 3dcd37c48aac..de08aad39e15 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -1196,15 +1196,20 @@ static void dpu_encoder_virt_atomic_enable(struct drm_encoder *drm_enc,
         struct drm_display_mode *cur_mode = NULL;
         struct msm_drm_private *priv = drm_enc->dev->dev_private;
         struct msm_display_info *disp_info;
+       int index;

         dpu_enc = to_dpu_encoder_virt(drm_enc);
         disp_info = &dpu_enc->disp_info;

+       disp_info = &dpu_enc->disp_info;
+       index = disp_info->h_tile_instance[0];
+
         dpu_enc->dsc = dpu_encoder_get_dsc_config(drm_enc);

-       if (disp_info->intf_type == INTF_DP)
-               dpu_enc->wide_bus_en = msm_dp_wide_bus_available(
-                               priv->dp[disp_info->h_tile_instance[0]]);
+       if (disp_info->intf_type == INTF_DSI)
+               dpu_enc->wide_bus_en = msm_dsi_is_widebus_enabled(priv->dsi[index]);
+       else if (disp_info->intf_type == INTF_DP)
+               dpu_enc->wide_bus_en = msm_dp_wide_bus_available(priv->dp[index]);

If you change the order, you won't have to touch DP lines.

Hi Dmitry,

Acked.



         mutex_lock(&dpu_enc->enc_lock);
         cur_mode = &dpu_enc->base.crtc->state->adjusted_mode;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index df88358e7037..dace6168be2d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -69,8 +69,10 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
                                 phys_enc->hw_intf,
                                 phys_enc->hw_pp->idx);

-       if (intf_cfg.dsc != 0)
+       if (intf_cfg.dsc != 0) {
                 cmd_mode_cfg.data_compress = true;
+               cmd_mode_cfg.wide_bus_en = dpu_encoder_is_widebus_enabled(phys_enc->parent);
+       }

This embeds the knowledge that a wide bus can only be enabled when DSC
is in use. Please move the wide_bus_en assignment out of conditional
code.

Wide bus for DSI will only be enabled if DSC is enabled, so this is technically not wrong, as DP will use the video mode path.



         if (phys_enc->hw_intf->ops.program_intf_cmd_cfg)
                 phys_enc->hw_intf->ops.program_intf_cmd_cfg(phys_enc->hw_intf, &cmd_mode_cfg);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index 8ec6505d9e78..dc6f3febb574 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -521,6 +521,9 @@ static void dpu_hw_intf_program_intf_cmd_cfg(struct dpu_hw_intf *ctx,

This function is only enabled for DPU >= 7.0, while IIRC wide bus can
be enabled even for some of the earlier chipsets.

The command mode path is only called for DSI, which only supports wide bus for DPU 7.0+.


         if (cmd_mode_cfg->data_compress)
                 intf_cfg2 |= INTF_CFG2_DCE_DATA_COMPRESS;

+       if (cmd_mode_cfg->wide_bus_en)
+               intf_cfg2 |= INTF_CFG2_DATABUS_WIDEN;
+
         DPU_REG_WRITE(&ctx->hw, INTF_CONFIG2, intf_cfg2);
  }

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
index 77f80531782b..c539025c418b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
@@ -50,6 +50,7 @@ struct dpu_hw_intf_status {

  struct dpu_hw_intf_cmd_mode_cfg {
         u8 data_compress;       /* enable data compress between dpu and dsi */
+       u8 wide_bus_en;         /* enable databus widen mode */
  };

  /**
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index 9d9d5e009163..e4f706b16aad 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -344,6 +344,7 @@ void msm_dsi_snapshot(struct msm_disp_state *disp_state, struct msm_dsi *msm_dsi
  bool msm_dsi_is_cmd_mode(struct msm_dsi *msm_dsi);
  bool msm_dsi_is_bonded_dsi(struct msm_dsi *msm_dsi);
  bool msm_dsi_is_master_dsi(struct msm_dsi *msm_dsi);
+bool msm_dsi_is_widebus_enabled(struct msm_dsi *msm_dsi);
  struct drm_dsc_config *msm_dsi_get_dsc_config(struct msm_dsi *msm_dsi);
  #else
  static inline void __init msm_dsi_register(void)
@@ -373,7 +374,10 @@ static inline bool msm_dsi_is_master_dsi(struct msm_dsi *msm_dsi)
  {
         return false;
  }
-
+static inline bool msm_dsi_is_widebus_enabled(struct msm_dsi *msm_dsi)
+{
+       return false;
+}

Empty line, please.

Acked.

Thanks,

Jessica Zhang


  static inline struct drm_dsc_config *msm_dsi_get_dsc_config(struct msm_dsi *msm_dsi)
  {
         return NULL;

--
2.41.0



--
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux