On Mon, Aug 07, 2023 at 09:34:59PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> Add a node for the SerDes PHY used by EMAC1 on sa8775p-ride.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
FWIW this seems to match downstream sources.
Reviewed-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index 7b55cb701472..38d10af37ab0 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -1846,6 +1846,15 @@ serdes0: phy@8901000 {
> status = "disabled";
> };
>
> + serdes1: phy@8902000 {
> + compatible = "qcom,sa8775p-dwmac-sgmii-phy";
> + reg = <0x0 0x08902000 0x0 0xe10>;
> + clocks = <&gcc GCC_SGMI_CLKREF_EN>;
> + clock-names = "sgmi_ref";
> + #phy-cells = <0>;
> + status = "disabled";
> + };
> +
> pdc: interrupt-controller@b220000 {
> compatible = "qcom,sa8775p-pdc", "qcom,pdc";
> reg = <0x0 0x0b220000 0x0 0x30000>,
> --
> 2.39.2
>
