Re: [PATCH 9/9] arm64: dts: qcom: sa8775p-ride: enable EMAC1

[Andrew Lunn <andrew@xxxxxxx>]

On Mon, Aug 07, 2023 at 09:35:07PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> 
> Enable the second MAC on sa8775p-ride.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 74 +++++++++++++++++++++++
>  1 file changed, 74 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> index af50aa2d9b10..0862bfb4c580 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> @@ -356,6 +356,80 @@ queue3 {
>  	};
>  };
>  
> +&ethernet1 {
> +	phy-mode = "sgmii";
> +	phy-handle = <&sgmii_phy1>;

This should be all you need.

> +	snps,shared-mdio = <&mdio0>;

This is not needed, since it is implicit in the phy-handle.

You need to debug why the existing -EPROBE_DEFER is not working.

    Andrew