On 2.08.2023 01:24, Dmitry Baryshkov wrote: > The RB1 platform doesn't have board-specific board-id programmed, it uses > generic 0xff. Thus add the property with the 'variant' of the > calibration data. > > Note: the driver will check for the calibration data for the following > IDs, so existing board-2.bin files will continue to work. > > - 'bus=snoc,qmi-board-id=ff,qmi-chip-id=120,variant=Thundercomm_RB1' > - 'bus=snoc,qmi-board-id=ff,qmi-chip-id=120' > - 'bus=snoc,qmi-board-id=ff' > > For the reference, the board is identified by the driver in the > following way: > > ath10k_snoc c800000.wifi: qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000 > ath10k_snoc c800000.wifi: qmi fw_version 0x337302d3 fw_build_timestamp 2023-01-06 01:50 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.3.7.c2-00723-QCAHLSWMTPLZ-1 > ath10k_snoc c800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000 > ath10k_snoc c800000.wifi: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 > ath10k_snoc c800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790 > ath10k_snoc c800000.wifi: htt-ver 3.114 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1 > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> > --- Thundercomm.. Qualcomm.. QTI.. I'm not even sure who makes these boards anymore.. But I guess Thundercomm sells them. Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Konrad
