Re: [PATCH v7 04/13] coresight-tpda: Add DSB dataset support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 25/07/2023 08:15, Tao Zhang wrote:
Read the DSB element size from the device tree. Set the register
bit that controls the DSB element size of the corresponding port.

Signed-off-by: Tao Zhang <quic_taozha@xxxxxxxxxxx>
---
  drivers/hwtracing/coresight/coresight-tpda.c | 96 +++++++++++++++++++++++++---
  drivers/hwtracing/coresight/coresight-tpda.h |  4 ++
  2 files changed, 90 insertions(+), 10 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c
index 8d2b9d2..7c71342 100644
--- a/drivers/hwtracing/coresight/coresight-tpda.c
+++ b/drivers/hwtracing/coresight/coresight-tpda.c
@@ -21,6 +21,58 @@
DEFINE_CORESIGHT_DEVLIST(tpda_devs, "tpda"); +/* Search and read element data size from the TPDM node in

minor nit:

/*
 * Search ...

+ * the devicetree. Each input port of TPDA is connected to
+ * a TPDM. Different TPDM supports different types of dataset,
+ * and some may support more than one type of dataset.
+ * Parameter "inport" is used to pass in the input port number
+ * of TPDA, and it is set to 0 in the recursize call.

+ * Parameter "parent" is used to pass in the original call.

Please remove references to the past and describe "match_inport"

+ */
+static int tpda_set_element_size(struct tpda_drvdata *drvdata,
+			   struct coresight_device *csdev, int inport, bool match_inport)

May be we could switch the order of the parameters:

match_inport, int port

Or even inport < 0, implies, port wont be matched.

i.e.,

tpda_set_element_size(drvdata, child, inport)

+{
+	static int nr_inport;
+	int i;
+	static bool tpdm_found;
+	struct coresight_device *in_csdev;
+
+	if (inport > (TPDA_MAX_INPORTS - 1))
+		return -EINVAL;
+
+	if (match_inport) {
+		nr_inport = inport;
+		tpdm_found = false;
+	}

Could we not avoid the static variables and this dance by making the function return the dsb_size ? See further down.


+
+	for (i = 0; i < csdev->pdata->nr_inconns; i++) {
+		in_csdev = csdev->pdata->in_conns[i]->src_dev;
+		if (!in_csdev)
+			break;
		continue ?
+
+		if (match_inport)
+			if (csdev->pdata->in_conns[i]->dest_port != inport)
+				continue;
+
+		if ((in_csdev->type == CORESIGHT_DEV_TYPE_SOURCE) &&
+				(in_csdev->subtype.source_subtype
+				== CORESIGHT_DEV_SUBTYPE_SOURCE_TPDM)) {

Please provide a helper :

static bool coresight_device_is_tpdm(csdev) {
	return
	 (csdev->type == CORESIGHT_DEV_TYPE_SOURCE) &&
	 (in_csdev->subtype.source_subtype ==
		CORESIGHT_DEV_SUBTYPE_SOURCE_TPDM);
}



+			of_property_read_u8(in_csdev->dev.parent->of_node,
+					"qcom,dsb-element-size", &drvdata->dsb_esize[nr_inport]);



+			if (!tpdm_found)
+				tpdm_found = true;
+			else
+				dev_warn(drvdata->dev,
+					"More than one TPDM is mapped to the TPDA input port %d.\n",
+					nr_inport);
+			continue;
+		}
+		tpda_set_element_size(drvdata, in_csdev, 0, false);
+	}
+

/*
 * Read the DSB element size from the TPDM device
 * Returns
 *	the size read from the firmware if available.
 *	0 - Otherwise, with a Warning once.
 */
static int tpdm_read_dsb_element_size(struct coresight_device *csdev)
{
	int rc, size = 0;

	rc = fwnode_property_read_u8(dev_fwnode(csdev->dev.parent),
				     "qcom,dsb-element-size", &size);
	if (rc)
		dev_warn_once(&in->dev, "Failed to read TPDM DSB Element size: %d\n",
		rc);
	return size;
}

static int tpda_get_element_size(struct coresight_device *csdev,
				 int inport)
{
	int dsb_size = -ENOENT;

	for (i = 0; i < csdev->pdata->nr_inconns; i++) {
		in = csdev->pdata->in_conns[i]->src_dev;
		if (!in)
			continue;
		if (coresight_device_is_tpdm(in)) {
			/* Ignore the TPDMs that do not match port */
			if (inport > 0 &&
			    (csdev->pdata->in_conns[i]->dest_port !=
			    inport))
				continue;
			size = tpdm_read_dsb_element_size(csdev);
		} else {
			/* Recurse down the path */
			size = tpda_set_element_size(in, -1);
		}

		if (size < 0)
			return size;
		/* We have found a size, save it. */
		if (dsb_size < 0) {
			dsb_size = size;
		} else {
			/* We have duplicate TPDMs */
			return -EEXIST;
		}
	}
	return dsb_size;
}




+	return 0;
+}
+
  /* Settings pre enabling port control register */
  static void tpda_enable_pre_port(struct tpda_drvdata *drvdata)
  {
@@ -32,26 +84,43 @@ static void tpda_enable_pre_port(struct tpda_drvdata *drvdata)
  	writel_relaxed(val, drvdata->base + TPDA_CR);
  }
-static void tpda_enable_port(struct tpda_drvdata *drvdata, int port)
+static int tpda_enable_port(struct tpda_drvdata *drvdata, int port)
  {
  	u32 val;
val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port));
+	/*
+	 * Configure aggregator port n DSB data set element size
+	 * Set the bit to 0 if the size is 32
+	 * Set the bit to 1 if the size is 64
+	 */
+	if (drvdata->dsb_esize[port] == 32)
+		val &= ~TPDA_Pn_CR_DSBSIZE;
+	else if (drvdata->dsb_esize[port] == 64)
+		val |= TPDA_Pn_CR_DSBSIZE;

Couldn't this be detected via tpda_get_element_size()? see below.

+	else
+		return -EINVAL;
+
  	/* Enable the port */
  	val |= TPDA_Pn_CR_ENA;
  	writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port));
+
+	return 0;
  }
-static void __tpda_enable(struct tpda_drvdata *drvdata, int port)
+static int __tpda_enable(struct tpda_drvdata *drvdata, int port)
  {
+	int ret;
+
  	CS_UNLOCK(drvdata->base);
if (!drvdata->csdev->enable)
  		tpda_enable_pre_port(drvdata);
- tpda_enable_port(drvdata, port);
-
+	ret = tpda_enable_port(drvdata, port);
  	CS_LOCK(drvdata->base);
+
+	return ret;
  }
static int tpda_enable(struct coresight_device *csdev,
@@ -59,16 +128,23 @@ static int tpda_enable(struct coresight_device *csdev,
  		       struct coresight_connection *out)
  {
  	struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
+	int ret;
+
+	ret = tpda_set_element_size(drvdata, csdev, in->dest_port, true);

	size  = tpda_get_element_size(csdev, in->dest_port);
	switch (size) {
	case 32:
	case 64:
		break;
	case -EEXIST:
		dev_warn_once("Detected multiple TPDMs on port %d", ..)
		fallthrough;
	default:
		return size;
	}

	drvdata->dsb_esize[in->dest_port] = size;

Suzuki



+	if (ret)
+		return ret;
spin_lock(&drvdata->spinlock);
-	if (atomic_read(&in->dest_refcnt) == 0)
-		__tpda_enable(drvdata, in->dest_port);
+	if (atomic_read(&in->dest_refcnt) == 0) {
+		ret = __tpda_enable(drvdata, in->dest_port);
+		if (!ret) {
+			atomic_inc(&in->dest_refcnt);
+			dev_dbg(drvdata->dev, "TPDA inport %d enabled.\n", in->dest_port);
+		}
+	}
- atomic_inc(&in->dest_refcnt);
  	spin_unlock(&drvdata->spinlock);
-
-	dev_dbg(drvdata->dev, "TPDA inport %d enabled.\n", in->dest_port);
-	return 0;
+	return ret;
  }
static void __tpda_disable(struct tpda_drvdata *drvdata, int port)
diff --git a/drivers/hwtracing/coresight/coresight-tpda.h b/drivers/hwtracing/coresight/coresight-tpda.h
index 0399678..12a1472 100644
--- a/drivers/hwtracing/coresight/coresight-tpda.h
+++ b/drivers/hwtracing/coresight/coresight-tpda.h
@@ -10,6 +10,8 @@
  #define TPDA_Pn_CR(n)		(0x004 + (n * 4))
  /* Aggregator port enable bit */
  #define TPDA_Pn_CR_ENA		BIT(0)
+/* Aggregator port DSB data set element size bit */
+#define TPDA_Pn_CR_DSBSIZE		BIT(8)
#define TPDA_MAX_INPORTS 32 @@ -23,6 +25,7 @@
   * @csdev:      component vitals needed by the framework.
   * @spinlock:   lock for the drvdata value.
   * @enable:     enable status of the component.
+ * @dsb_esize:  DSB element size for each inport, it must be 32 or 64.
   */
  struct tpda_drvdata {
  	void __iomem		*base;
@@ -30,6 +33,7 @@ struct tpda_drvdata {
  	struct coresight_device	*csdev;
  	spinlock_t		spinlock;
  	u8			atid;
+	u8			dsb_esize[TPDA_MAX_INPORTS];
  };
#endif /* _CORESIGHT_CORESIGHT_TPDA_H */




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux