Re: [PATCH 3/3] arm64: dts: qcom: Add board id for lazor/limozeen

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, Aug 2, 2023 at 2:58 AM Sheng-Liang Pan
<sheng-liang.pan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
>
> add BRD_ID(0, Z, 0) = 10 for new board with ALC5682i-VS
>
> Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
>
>  arch/arm64/boot/dts/qcom/Makefile             |  5 ++
>  ...sc7180-trogdor-lazor-limozeen-nots-r10.dts | 39 +++++++++++++
>  .../sc7180-trogdor-lazor-limozeen-nots-r9.dts |  4 +-
>  .../sc7180-trogdor-lazor-limozeen-r10.dts     | 55 +++++++++++++++++++
>  .../qcom/sc7180-trogdor-lazor-limozeen-r9.dts |  4 +-
>  .../dts/qcom/sc7180-trogdor-lazor-r10-kb.dts  | 33 +++++++++++
>  .../dts/qcom/sc7180-trogdor-lazor-r10-lte.dts | 37 +++++++++++++
>  .../dts/qcom/sc7180-trogdor-lazor-r10.dts     | 29 ++++++++++
>  .../dts/qcom/sc7180-trogdor-lazor-r9-kb.dts   |  4 +-
>  .../dts/qcom/sc7180-trogdor-lazor-r9-lte.dts  |  4 +-
>  .../boot/dts/qcom/sc7180-trogdor-lazor-r9.dts |  4 +-
>  11 files changed, 208 insertions(+), 10 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 337abc4ceb17..73e745fb1ff0 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -109,11 +109,16 @@ dtb-$(CONFIG_ARCH_QCOM)   += sc7180-trogdor-lazor-r3-lte.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-lazor-r9.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-lazor-r9-kb.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-lazor-r9-lte.dtb
> +dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-lazor-r10.dtb
> +dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-lazor-r10-kb.dtb
> +dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-lazor-r10-lte.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-lazor-limozeen-r4.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-lazor-limozeen-r9.dtb
> +dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-lazor-limozeen-r10.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-lazor-limozeen-nots-r4.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-lazor-limozeen-nots-r5.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-lazor-limozeen-nots-r9.dtb
> +dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-lazor-limozeen-nots-r10.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-pazquel-lte-parade.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-pazquel-lte-ti.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-pazquel-parade.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
> new file mode 100644
> index 000000000000..63602feceea6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
> @@ -0,0 +1,39 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Lazor Limozeen board device tree source
> + *
> + * Copyright 2021 Google LLC.

nit: for newly created files you usually want to pick this year
(2023). I assume Google doesn't mind you assigning them the copyright,
but you could probably also put Quanta here if your legal cares. The
licensing is still "(GPL-2.0+ OR MIT)" as per the first line of the
file.


> + */
> +
> +/dts-v1/;
> +
> +#include "sc7180.dtsi"

Shouldn't the above include be of "sc7180-trogdor.dtsi"? That would
make it match -r9. I would sorta believe it wouldn't compile
otherwise.


> +#include "sc7180-trogdor-parade-ps8640.dtsi"
> +#include "sc7180-trogdor-lazor.dtsi"
> +#include "sc7180-trogdor-lte-sku.dtsi"
> +
> +/ {
> +       model = "Google Lazor Limozeen without Touchscreen (rev10+, rt5682s)";

nit: "rt5682s" is implied by "rev10+", so you don't need to include it
in the model name.


> +       compatible = "google,lazor-sku6", "google,lazor-sku18", "qcom,sc7180";
> +};
> +
> +/delete-node/&ap_ts;
> +
> +&panel {
> +       compatible = "edp-panel";
> +};
> +
> +&sdhc_2 {
> +       status = "okay";
> +};
> +
> +&alc5682 {
> +       compatible = "realtek,rt5682s";
> +       realtek,dmic1-clk-pin = <2>;
> +       realtek,dmic-clk-rate-hz = <2048000>;

Looking at other trogdor device tree files, you also need:

/delete-property/ VBAT-supply;

I believe that "make dtbs_check" will complain otherwise.

Also note that these things should be sorted alphabetically, so your
"alc5682" node should be above "ap_ts_pen_1v8".

I guess in theory we could add a "sc7180-trogdor-rt5682s.dtsi"
fragment since so many boards are using it now, though I won't insist
on it.


Similar comments for your modifications to some of the other files.


-Doug




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux