Re: [PATCH] drm/msm/dpu: increase memtype count to 16 for sm8550

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/08/2023 15:48, Jonathan Marek wrote:
sm8550 has 16 vbif clients.

This fixes the extra 2 clients (DMA4/DMA5) not having their memtype
initialized. This fixes DMA4/DMA5 planes not displaying correctly.

Fixes: efcd0107 ("drm/msm/dpu: add support for SM8550")
Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
---
  .../msm/disp/dpu1/catalog/dpu_9_0_sm8550.h    |  4 ++--
  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 20 +++++++++++++++++++
  2 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
index f17b9a7fee85..89a2ac1e840d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
@@ -245,8 +245,8 @@ const struct dpu_mdss_cfg dpu_sm8550_cfg = {
  	.merge_3d = sm8550_merge_3d,
  	.intf_count = ARRAY_SIZE(sm8550_intf),
  	.intf = sm8550_intf,
-	.vbif_count = ARRAY_SIZE(sdm845_vbif),
-	.vbif = sdm845_vbif,
+	.vbif_count = ARRAY_SIZE(sm8550_vbif),
+	.vbif = sm8550_vbif,
  	.perf = &sm8550_perf_data,
  	.mdss_irqs = BIT(MDP_SSPP_TOP0_INTR) | \
  		     BIT(MDP_SSPP_TOP0_INTR2) | \
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 0de507d4d7b7..8b17a4a9b438 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -663,6 +663,26 @@ static const struct dpu_vbif_cfg sdm845_vbif[] = {
  	},
  };
+static const struct dpu_vbif_cfg sm8550_vbif[] = {
+	{
+	.name = "vbif_rt", .id = VBIF_RT,
+	.base = 0, .len = 0x1040,
+	.features = BIT(DPU_VBIF_QOS_REMAP),
+	.xin_halt_timeout = 0x4000,
+	.qos_rp_remap_size = 0x40,
+	.qos_rt_tbl = {
+		.npriority_lvl = ARRAY_SIZE(sdm845_rt_pri_lvl),
+		.priority_lvl = sdm845_rt_pri_lvl,
+		},
+	.qos_nrt_tbl = {
+		.npriority_lvl = ARRAY_SIZE(sdm845_nrt_pri_lvl),
+		.priority_lvl = sdm845_nrt_pri_lvl,
+		},
+	.memtype_count = 16,
+	.memtype = {3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3},
+	},
+};
+
  /*************************************************************
   * PERF data config
   *************************************************************/

Thanks !

Tested-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> # on SM8550-QRD



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux