[PATCH v13 03/10] dt-bindings: opp: v2-qcom-level: Document CPR3 open/closed loop volt adjustment

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



CPR3 and newer can be fed per-OPP voltage adjustment values for both
open- and closed-loop paths to make better decisions about settling
on the final voltage offset target. Document these properties.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Tested-by: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 .../devicetree/bindings/opp/opp-v2-qcom-level.yaml         | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
index a30ef93213c0..b203ea01b17a 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
@@ -34,6 +34,20 @@ patternProperties:
         minItems: 1
         maxItems: 2
 
+      qcom,opp-cloop-vadj:
+        description: |
+          An array of per-thread values representing the closed-loop
+          voltage adjustment value associated with this OPP node.
+        $ref: /schemas/types.yaml#/definitions/int32-array
+        maxItems: 2
+
+      qcom,opp-oloop-vadj:
+        description: |
+          An array of per-thread values representing the open-loop
+          voltage adjustment value associated with this OPP node.
+        $ref: /schemas/types.yaml#/definitions/int32-array
+        maxItems: 2
+
     required:
       - opp-level
       - qcom,opp-fuse-level

-- 
2.41.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux