Qualcomm Voltage Mode BMS is a battery monitoring block in PM8916 PMIC. Document it's DT binding. Signed-off-by: Nikita Travkin <nikita@xxxxxxx> --- v2: Describe all interrupts. (Conor) --- .../bindings/power/supply/qcom,pm8916-bms-vm.yaml | 83 ++++++++++++++++++++++ 1 file changed, 83 insertions(+) diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8916-bms-vm.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8916-bms-vm.yaml new file mode 100644 index 000000000000..ad764e69ab57 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8916-bms-vm.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/qcom,pm8916-bms-vm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Voltage Mode BMS + +maintainers: + - Nikita Travkin <nikita@xxxxxxx> + +description: + Voltage Mode BMS is a hardware block found in some Qualcomm PMICs + such as pm8916. This block performs battery voltage monitoring. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: qcom,pm8916-bms-vm + + reg: + maxItems: 1 + + interrupts: + items: + - description: BMS FSM left S3 mode + - description: BMS FSM entered S2 mode + - description: OCV measured in S3 mode + - description: OCV below threshold + - description: FIFO update done + - description: BMS FSM switched state + + interrupt-names: + items: + - const: cv_leave + - const: cv_enter + - const: ocv_good + - const: ocv_thr + - const: fifo + - const: state_chg + + monitored-battery: true + + power-supplies: true + +required: + - compatible + - reg + - interrupts + - interrupt-names + - monitored-battery + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + #address-cells = <1>; + #size-cells = <0>; + + battery@4000 { + compatible = "qcom,pm8916-bms-vm"; + reg = <0x4000>; + interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "cv_leave", + "cv_enter", + "ocv_good", + "ocv_thr", + "fifo", + "state_chg"; + + monitored-battery = <&battery>; + power-supplies = <&pm8916_charger>; + }; + }; -- 2.41.0
