[PATCH v2 06/10] interconnect: qcom: qcm2290: Set AB coefficients

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some buses need additional manual adjustments atop the usual
calculations. Fill in the missing coefficients.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 drivers/interconnect/qcom/qcm2290.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/interconnect/qcom/qcm2290.c b/drivers/interconnect/qcom/qcm2290.c
index 52a6eb32e832..42fa01c66e73 100644
--- a/drivers/interconnect/qcom/qcm2290.c
+++ b/drivers/interconnect/qcom/qcm2290.c
@@ -1201,6 +1201,7 @@ static const struct qcom_icc_desc qcm2290_bimc = {
 	.regmap_cfg = &qcm2290_bimc_regmap_config,
 	/* M_REG_BASE() in vendor msm_bus_bimc_adhoc driver */
 	.qos_offset = 0x8000,
+	.ab_coeff = 153,
 };
 
 static struct qcom_icc_node * const qcm2290_cnoc_nodes[] = {
@@ -1327,6 +1328,7 @@ static const struct qcom_icc_desc qcm2290_mmnrt_virt = {
 	.bus_clk_desc = &mmaxi_0_clk,
 	.regmap_cfg = &qcm2290_snoc_regmap_config,
 	.qos_offset = 0x15000,
+	.ab_coeff = 142,
 };
 
 static struct qcom_icc_node * const qcm2290_mmrt_virt_nodes[] = {
@@ -1342,6 +1344,7 @@ static const struct qcom_icc_desc qcm2290_mmrt_virt = {
 	.bus_clk_desc = &mmaxi_1_clk,
 	.regmap_cfg = &qcm2290_snoc_regmap_config,
 	.qos_offset = 0x15000,
+	.ab_coeff = 139,
 };
 
 static const struct of_device_id qcm2290_noc_of_match[] = {

-- 
2.41.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux