If this hardware couldn't get messier, some nodes are supposed to drive
their own bus clock.. Presumably to connect to some intermediate
interface between the node itself and the bus it's (supposed to be)
connected to.
Expand the node struct with the necessary data and hook up the
allocations & calculations.
To save on memory (not very many nodes have their own clocks), allocate
a pointer to an array instead of allocating an array within
qcom_icc_node.
Note that the node-specific AB/IB coefficients contribute (by design)
to both the node-level and the bus-level aggregation.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
drivers/interconnect/qcom/icc-rpm.c | 48 +++++++++++++++++++++++++++++++------
drivers/interconnect/qcom/icc-rpm.h | 2 ++
2 files changed, 43 insertions(+), 7 deletions(-)
diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
index f1d8ed354718..f0e575c95b49 100644
--- a/drivers/interconnect/qcom/icc-rpm.c
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -411,6 +411,33 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
qp->bus_clk_rate[QCOM_SMD_RPM_SLEEP_STATE] = sleep_rate;
}
+ /* Handle the node-specific clock */
+ if (!src_qn->bus_clk_desc)
+ return 0;
+
+ active_rate = qcom_icc_calc_rate(qp, src_qn, QCOM_SMD_RPM_ACTIVE_STATE);
+ sleep_rate = qcom_icc_calc_rate(qp, src_qn, QCOM_SMD_RPM_SLEEP_STATE);
+
+ if (active_rate != src_qn->bus_clk_rate[QCOM_SMD_RPM_ACTIVE_STATE]) {
+ ret = qcom_icc_rpm_set_bus_rate(src_qn->bus_clk_desc, QCOM_SMD_RPM_ACTIVE_STATE,
+ active_rate);
+ if (ret)
+ return ret;
+
+ /* Cache the rate after we've successfully committed it to RPM */
+ src_qn->bus_clk_rate[QCOM_SMD_RPM_ACTIVE_STATE] = active_rate;
+ }
+
+ if (sleep_rate != src_qn->bus_clk_rate[QCOM_SMD_RPM_SLEEP_STATE]) {
+ ret = qcom_icc_rpm_set_bus_rate(src_qn->bus_clk_desc, QCOM_SMD_RPM_SLEEP_STATE,
+ sleep_rate);
+ if (ret)
+ return ret;
+
+ /* Cache the rate after we've successfully committed it to RPM */
+ src_qn->bus_clk_rate[QCOM_SMD_RPM_SLEEP_STATE] = sleep_rate;
+ }
+
return 0;
}
@@ -531,24 +558,31 @@ int qnoc_probe(struct platform_device *pdev)
return ret;
for (i = 0; i < num_nodes; i++) {
+ struct qcom_icc_node *qn = qnodes[i];
size_t j;
- node = icc_node_create(qnodes[i]->id);
+ if (qn->bus_clk_desc) {
+ qn->bus_clk_rate = devm_kcalloc(dev, QCOM_SMD_RPM_STATE_NUM,
+ sizeof(*qn->bus_clk_rate),
+ GFP_KERNEL);
+ }
+
+ node = icc_node_create(qn->id);
if (IS_ERR(node)) {
ret = PTR_ERR(node);
goto err_remove_nodes;
}
- node->name = qnodes[i]->name;
- node->data = qnodes[i];
+ node->name = qn->name;
+ node->data = qn;
icc_node_add(node, provider);
- for (j = 0; j < qnodes[i]->num_links; j++)
- icc_link_create(node, qnodes[i]->links[j]);
+ for (j = 0; j < qn->num_links; j++)
+ icc_link_create(node, qn->links[j]);
/* Set QoS registers (we only need to do it once, generally) */
- if (qnodes[i]->qos.ap_owned &&
- qnodes[i]->qos.qos_mode != NOC_QOS_MODE_INVALID) {
+ if (qn->qos.ap_owned &&
+ qn->qos.qos_mode != NOC_QOS_MODE_INVALID) {
ret = qcom_icc_qos_set(node);
if (ret)
return ret;
diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
index 5e7d6a4fd2f3..835b83cfb548 100644
--- a/drivers/interconnect/qcom/icc-rpm.h
+++ b/drivers/interconnect/qcom/icc-rpm.h
@@ -97,6 +97,7 @@ struct qcom_icc_qos {
* @num_links: the total number of @links
* @channels: number of channels at this node (e.g. DDR channels)
* @buswidth: width of the interconnect between a node and the bus (bytes)
+ * @bus_clk_desc: a pointer to a rpm_clk_resource description of bus clocks
* @sum_avg: current sum aggregate value of all avg bw requests
* @max_peak: current max aggregate value of all peak bw requests
* @mas_rpm_id: RPM id for devices that are bus masters
@@ -110,6 +111,7 @@ struct qcom_icc_node {
u16 num_links;
u16 channels;
u16 buswidth;
+ const struct rpm_clk_resource *bus_clk_desc;
u64 sum_avg[QCOM_SMD_RPM_STATE_NUM];
u64 max_peak[QCOM_SMD_RPM_STATE_NUM];
int mas_rpm_id;
--
2.41.0
