On 28.07.2023 15:23, Vikash Garodia wrote:
> From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
>
> this implements functions for calculating current load of the
> hardware. Depending on the count of instances and
> resolutions it selects the best clock rate for the video
> core. Also it scales clocks, power and enable/disable dcvs.
>
> Signed-off-by: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
> Signed-off-by: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
> ---[...]
> +
> +/* TODO: Move to dtsi OR use source clock instead of branch clock.*/
> +#define MSM_VIDC_CLOCK_SOURCE_SCALING_RATIO 3
Seems unused in this patch.
> +
> +enum vidc_bus_type {
> + PERF,
> + DDR,
> + LLCC,
> +};
> +
> +/*
> + * Minimum dimensions for which to calculate bandwidth.
> + * This means that anything bandwidth(0, 0) ==
> + * bandwidth(BASELINE_DIMENSIONS.width, BASELINE_DIMENSIONS.height)
> + */
> +static const struct {
> + int height, width;
> +} BASELINE_DIMENSIONS = {
> + .width = 1280,
> + .height = 720,
> +};
> +
> +/* converts Mbps to bps (the "b" part can be bits or bytes based on context) */
if 'b', the multiplier must be 1024 or it makes no sense
> +#define kbps(__mbps) ((__mbps) * 1000)
> +#define bps(__mbps) (kbps(__mbps) * 1000)
> +
[...]
> +void __dump(struct dump dump[], int len)
> +{
> + int c = 0;
> +
> + for (c = 0; c < len; ++c) {
> + char format_line[128] = "", formatted_line[128] = "";
That's a lot of bytes on the stack..
> +
> + if (dump[c].val == DUMP_HEADER_MAGIC) {
> + snprintf(formatted_line, sizeof(formatted_line), "%s\n",
> + dump[c].key);
> + } else {
> + snprintf(format_line, sizeof(format_line),
> + " %-35s: %s\n", dump[c].key,
> + dump[c].format);
> + snprintf(formatted_line, sizeof(formatted_line),
> + format_line, dump[c].val);
> + }
> + d_vpr_b("%s", formatted_line);
> + }
> +}
> +
> +u64 msm_vidc_max_freq(struct msm_vidc_inst *inst)
> +{
> + struct msm_vidc_core *core;
> + struct frequency_table *freq_tbl;
> + u64 freq = 0;
> +
> + core = inst->core;
> +
> + if (!core->resource || !core->resource->freq_set.freq_tbl ||
> + !core->resource->freq_set.count) {
> + i_vpr_e(inst, "%s: invalid frequency table\n", __func__);
> + return freq;
> + }
> + freq_tbl = core->resource->freq_set.freq_tbl;
Do we need a separate freuqency table if we have OPP?
[...]
> + if (inst->power.fw_cf) {
> + cf = inst->power.fw_cf;
> + frame_size = (msm_vidc_get_mbs_per_frame(inst) / (32 * 8) * 3) / 2;
too magic!
Konrad
