Re: [PATCH v4 2/2] usb: typec: qcom-pmic-typec: register drm_bridge

[Guenter Roeck <linux@xxxxxxxxxxxx>]

On 7/28/23 04:09, Dmitry Baryshkov wrote:
> The current approach to handling DP on bridge-enabled platforms requires
> a chain of DP bridges up to the USB-C connector. Register a last DRM
> bridge for such chain.
>
> Acked-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>   drivers/usb/typec/tcpm/Kconfig                |  1 +
>   drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 35 +++++++++++++++++++
>   2 files changed, 36 insertions(+)
>
> diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
> index 5d393f520fc2..0b2993fef564 100644
> --- a/drivers/usb/typec/tcpm/Kconfig
> +++ b/drivers/usb/typec/tcpm/Kconfig
> @@ -79,6 +79,7 @@ config TYPEC_WCOVE
>   config TYPEC_QCOM_PMIC
>   	tristate "Qualcomm PMIC USB Type-C Port Controller Manager driver"
>   	depends on ARCH_QCOM || COMPILE_TEST
> +	depends on DRM || DRM=n
>   	help
>   	  A Type-C port and Power Delivery driver which aggregates two
>   	  discrete pieces of silicon in the PM8150b PMIC block: the
> diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
> index af44ee4e6e86..0ea7cc656089 100644
> --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
> +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
> @@ -17,6 +17,9 @@
>   #include <linux/usb/role.h>
>   #include <linux/usb/tcpm.h>
>   #include <linux/usb/typec_mux.h>
> +
> +#include <drm/drm_bridge.h>
> +
>   #include "qcom_pmic_typec_pdphy.h"
>   #include "qcom_pmic_typec_port.h"
>   
> @@ -33,6 +36,7 @@ struct pmic_typec {
>   	struct pmic_typec_port	*pmic_typec_port;
>   	bool			vbus_enabled;
>   	struct mutex		lock;		/* VBUS state serialization */
> +	struct drm_bridge	bridge;
>   };
>   
>   #define tcpc_to_tcpm(_tcpc_) container_of(_tcpc_, struct pmic_typec, tcpc)
> @@ -146,6 +150,33 @@ static int qcom_pmic_typec_init(struct tcpc_dev *tcpc)
>   	return 0;
>   }
>   
> +#ifdef CONFIG_DRM

Sorry for not noticing earlier. This needs to be "#if IS_ENABLED(CONFIG_DRM)"
or otherwise would not catch DRM=m situations.

> +static int qcom_pmic_typec_attach(struct drm_bridge *bridge,
> +				     enum drm_bridge_attach_flags flags)
> +{
> +	return flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR ? 0 : -EINVAL;
> +}
> +
> +static const struct drm_bridge_funcs qcom_pmic_typec_bridge_funcs = {
> +	.attach = qcom_pmic_typec_attach,
> +};
> +
> +static int qcom_pmic_typec_init_drm(struct pmic_typec *tcpm)
> +{
> +	tcpm->bridge.funcs = &qcom_pmic_typec_bridge_funcs;
> +	tcpm->bridge.of_node = of_get_child_by_name(tcpm->dev->of_node, "connector");
> +	tcpm->bridge.ops = DRM_BRIDGE_OP_HPD;
> +	tcpm->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
> +
> +	return devm_drm_bridge_add(tcpm->dev, &tcpm->bridge);
> +}
> +#else
> +static int qcom_pmic_typec_init_drm(struct pmic_typec *tcpm)
> +{
> +	return 0;
> +}
> +#endif
> +
>   static int qcom_pmic_typec_probe(struct platform_device *pdev)
>   {
>   	struct pmic_typec *tcpm;
> @@ -208,6 +239,10 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
>   	mutex_init(&tcpm->lock);
>   	platform_set_drvdata(pdev, tcpm);
>   
> +	ret = qcom_pmic_typec_init_drm(tcpm);
> +	if (ret)
> +		return ret;
> +
>   	tcpm->tcpc.fwnode = device_get_named_child_node(tcpm->dev, "connector");
>   	if (!tcpm->tcpc.fwnode)
>   		return -EINVAL;