[PATCH v2] drm/panel: Enable DSC and CMD mode for Visionox VTDR6130 panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable display compression (DSC v1.2) and CMD mode for 1080x2400 Visionox
VTDR6130 AMOLED DSI panel. In addition, this patch will set the default
to command mode with DSC enabled.

Note: This patch has only been validated DSC over command mode as DSC over
video mode has never been validated for the MSM driver before.

Depends on: "Add prepare_prev_first flag to Visionox VTDR6130" [1]

Changes since v1:
 - Changed from email address

[1] https://patchwork.freedesktop.org/series/121337/

Suggested-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
Signed-off-by: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
---
 .../gpu/drm/panel/panel-visionox-vtdr6130.c   | 77 ++++++++++++++++++-
 1 file changed, 73 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
index e1363e128e7e..5658d39a3a6b 100644
--- a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
+++ b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
@@ -9,6 +9,7 @@
 #include <linux/of.h>
 
 #include <drm/display/drm_dsc.h>
+#include <drm/display/drm_dsc_helper.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_modes.h>
 #include <drm/drm_panel.h>
@@ -20,7 +21,8 @@ struct visionox_vtdr6130 {
 	struct mipi_dsi_device *dsi;
 	struct gpio_desc *reset_gpio;
 	struct regulator_bulk_data supplies[3];
-	bool prepared;
+	bool prepared, enabled;
+	bool video_mode;
 };
 
 static inline struct visionox_vtdr6130 *to_visionox_vtdr6130(struct drm_panel *panel)
@@ -50,12 +52,18 @@ static int visionox_vtdr6130_on(struct visionox_vtdr6130 *ctx)
 	if (ret)
 		return ret;
 
+	mipi_dsi_dcs_write_seq(dsi, 0x03, 0x01);
 	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
 	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, 0x00, 0x00);
 	mipi_dsi_dcs_write_seq(dsi, 0x59, 0x09);
 	mipi_dsi_dcs_write_seq(dsi, 0x6c, 0x01);
 	mipi_dsi_dcs_write_seq(dsi, 0x6d, 0x00);
-	mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x01);
+	
+	if (ctx->video_mode)
+		mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x01);
+	else
+		mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x02);
+
 	mipi_dsi_dcs_write_seq(dsi, 0x70,
 			       0x12, 0x00, 0x00, 0xab, 0x30, 0x80, 0x09, 0x60, 0x04,
 			       0x38, 0x00, 0x28, 0x02, 0x1c, 0x02, 0x1c, 0x02, 0x00,
@@ -214,6 +222,42 @@ static const struct drm_display_mode visionox_vtdr6130_mode = {
 	.height_mm = 157,
 };
 
+static int visionox_vtdr6130_enable(struct drm_panel *panel)
+{
+	struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel);
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct drm_dsc_picture_parameter_set pps;
+	int ret;
+
+	if (ctx->enabled)
+		return 0;
+
+	if (!dsi->dsc) {
+		dev_err(&dsi->dev, "DSC not attached to DSI\n");
+		return -ENODEV;
+	}
+
+	drm_dsc_pps_payload_pack(&pps, dsi->dsc);
+	ret = mipi_dsi_picture_parameter_set(dsi, &pps);
+	if (ret) {
+		dev_err(&dsi->dev, "Failed to set PPS\n");
+		return ret;
+	}
+
+	ctx->enabled = true;
+
+	return 0;
+}
+
+static int visionox_vtdr6130_disable(struct drm_panel *panel)
+{
+	struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel);
+
+	ctx->enabled = false;
+
+	return 0;
+}
+
 static int visionox_vtdr6130_get_modes(struct drm_panel *panel,
 				       struct drm_connector *connector)
 {
@@ -237,6 +281,8 @@ static const struct drm_panel_funcs visionox_vtdr6130_panel_funcs = {
 	.prepare = visionox_vtdr6130_prepare,
 	.unprepare = visionox_vtdr6130_unprepare,
 	.get_modes = visionox_vtdr6130_get_modes,
+	.enable = visionox_vtdr6130_enable,
+	.disable = visionox_vtdr6130_disable,
 };
 
 static int visionox_vtdr6130_bl_update_status(struct backlight_device *bl)
@@ -269,11 +315,31 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
 {
 	struct device *dev = &dsi->dev;
 	struct visionox_vtdr6130 *ctx;
+	struct drm_dsc_config *dsc;
 	int ret;
 
 	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
 		return -ENOMEM;
+	
+	ctx->video_mode = of_property_read_bool(dev->of_node, "enforce-video-mode");
+
+	dsc = devm_kzalloc(dev, sizeof(*dsc), GFP_KERNEL);
+	if (!dsc)
+		return -ENOMEM;
+
+	/* Set DSC params */
+	dsc->dsc_version_major = 0x1;
+	dsc->dsc_version_minor = 0x2;
+
+	dsc->slice_height = 40;
+	dsc->slice_width = 540;
+	dsc->slice_count = 2;
+	dsc->bits_per_component = 8;
+	dsc->bits_per_pixel = 8 << 4;
+	dsc->block_pred_enable = true;
+
+	dsi->dsc = dsc;
 
 	ctx->supplies[0].supply = "vddio";
 	ctx->supplies[1].supply = "vci";
@@ -294,8 +360,11 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
 
 	dsi->lanes = 4;
 	dsi->format = MIPI_DSI_FMT_RGB888;
-	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET |
-			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+	dsi->mode_flags = MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_CLOCK_NON_CONTINUOUS;
+	if (ctx->video_mode)
+		dsi->mode_flags |= MIPI_DSI_MODE_VIDEO;
+
 	ctx->panel.prepare_prev_first = true;
 
 	drm_panel_init(&ctx->panel, dev, &visionox_vtdr6130_panel_funcs,
-- 
2.41.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux