Re: [PATCH 3/7] drm/msm/dpu: inline _setup_intf_ops()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2023-07-27 19:21:00, Dmitry Baryshkov wrote:
> Inline the _setup_intf_ops() function, it makes it easier to handle
> different conditions involving INTF configuration.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>

> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 47 +++++++++------------
>  1 file changed, 21 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> index 8ec6505d9e78..7ca772791a73 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> @@ -524,31 +524,6 @@ static void dpu_hw_intf_program_intf_cmd_cfg(struct dpu_hw_intf *ctx,
>  	DPU_REG_WRITE(&ctx->hw, INTF_CONFIG2, intf_cfg2);
>  }
>  
> -static void _setup_intf_ops(struct dpu_hw_intf_ops *ops,
> -		unsigned long cap, const struct dpu_mdss_version *mdss_rev)
> -{
> -	ops->setup_timing_gen = dpu_hw_intf_setup_timing_engine;
> -	ops->setup_prg_fetch  = dpu_hw_intf_setup_prg_fetch;
> -	ops->get_status = dpu_hw_intf_get_status;
> -	ops->enable_timing = dpu_hw_intf_enable_timing_engine;
> -	ops->get_line_count = dpu_hw_intf_get_line_count;
> -	if (cap & BIT(DPU_INTF_INPUT_CTRL))
> -		ops->bind_pingpong_blk = dpu_hw_intf_bind_pingpong_blk;
> -	ops->setup_misr = dpu_hw_intf_setup_misr;
> -	ops->collect_misr = dpu_hw_intf_collect_misr;
> -
> -	if (cap & BIT(DPU_INTF_TE)) {
> -		ops->enable_tearcheck = dpu_hw_intf_enable_te;
> -		ops->disable_tearcheck = dpu_hw_intf_disable_te;
> -		ops->connect_external_te = dpu_hw_intf_connect_external_te;
> -		ops->vsync_sel = dpu_hw_intf_vsync_sel;
> -		ops->disable_autorefresh = dpu_hw_intf_disable_autorefresh;
> -	}
> -
> -	if (mdss_rev->core_major_ver >= 7)
> -		ops->program_intf_cmd_cfg = dpu_hw_intf_program_intf_cmd_cfg;
> -}
> -
>  struct dpu_hw_intf *dpu_hw_intf_init(const struct dpu_intf_cfg *cfg,
>  		void __iomem *addr, const struct dpu_mdss_version *mdss_rev)
>  {
> @@ -571,7 +546,27 @@ struct dpu_hw_intf *dpu_hw_intf_init(const struct dpu_intf_cfg *cfg,
>  	 */
>  	c->idx = cfg->id;
>  	c->cap = cfg;
> -	_setup_intf_ops(&c->ops, c->cap->features, mdss_rev);
> +
> +	c->ops.setup_timing_gen = dpu_hw_intf_setup_timing_engine;
> +	c->ops.setup_prg_fetch  = dpu_hw_intf_setup_prg_fetch;
> +	c->ops.get_status = dpu_hw_intf_get_status;
> +	c->ops.enable_timing = dpu_hw_intf_enable_timing_engine;
> +	c->ops.get_line_count = dpu_hw_intf_get_line_count;
> +	if (cfg->features & BIT(DPU_INTF_INPUT_CTRL))
> +		c->ops.bind_pingpong_blk = dpu_hw_intf_bind_pingpong_blk;

While at it, could we sort these down with the other conditional
callbacks?

> +	c->ops.setup_misr = dpu_hw_intf_setup_misr;
> +	c->ops.collect_misr = dpu_hw_intf_collect_misr;
> +
> +	if (cfg->features & BIT(DPU_INTF_TE)) {

Any clue why we're not using test_bit()?  Feels a bit inconsistent.

> +		c->ops.enable_tearcheck = dpu_hw_intf_enable_te;
> +		c->ops.disable_tearcheck = dpu_hw_intf_disable_te;
> +		c->ops.connect_external_te = dpu_hw_intf_connect_external_te;
> +		c->ops.vsync_sel = dpu_hw_intf_vsync_sel;
> +		c->ops.disable_autorefresh = dpu_hw_intf_disable_autorefresh;
> +	}
> +
> +	if (mdss_rev->core_major_ver >= 7)
> +		c->ops.program_intf_cmd_cfg = dpu_hw_intf_program_intf_cmd_cfg;
>  
>  	return c;
>  }
> -- 
> 2.39.2
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux