Re: [PATCH v2 4/6] arm64: dts: qcom: Add base SM4450 QRD DTS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27.07.2023 10:49, Tengfei Fan wrote:
> 
> 
> 在 7/27/2023 3:59 PM, Konrad Dybcio 写道:
>> On 27.07.2023 08:56, Krzysztof Kozlowski wrote:
>>> On 27/07/2023 04:35, Tengfei Fan wrote:
>>>> Add DTS for Qualcomm QRD platform which uses SM4450 SoC.
>>>>
>>>> Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
>>>> ---
>>>>   arch/arm64/boot/dts/qcom/Makefile       |  1 +
>>>>   arch/arm64/boot/dts/qcom/sm4450-qrd.dts | 18 ++++++++++++++++++
>>>>   2 files changed, 19 insertions(+)
>>>>   create mode 100644 arch/arm64/boot/dts/qcom/sm4450-qrd.dts
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>>> index 337abc4ceb17..db805d0929c8 100644
>>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>>> @@ -186,6 +186,7 @@ dtb-$(CONFIG_ARCH_QCOM)    += sdm850-lenovo-yoga-c630.dtb
>>>>   dtb-$(CONFIG_ARCH_QCOM)    += sdm850-samsung-w737.dtb
>>>>   dtb-$(CONFIG_ARCH_QCOM)    += sdx75-idp.dtb
>>>>   dtb-$(CONFIG_ARCH_QCOM)    += sm4250-oneplus-billie2.dtb
>>>> +dtb-$(CONFIG_ARCH_QCOM)    += sm4450-qrd.dtb
>>>>   dtb-$(CONFIG_ARCH_QCOM)    += sm6115-fxtec-pro1x.dtb
>>>>   dtb-$(CONFIG_ARCH_QCOM)    += sm6115p-lenovo-j606f.dtb
>>>>   dtb-$(CONFIG_ARCH_QCOM)    += sm6125-sony-xperia-seine-pdx201.dtb
>>>> diff --git a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
>>>> new file mode 100644
>>>> index 000000000000..04ad1dd4285a
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
>>>> @@ -0,0 +1,18 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +
>>>> +#include "sm4450.dtsi"
>>>> +/ {
>>>> +    model = "Qualcomm Technologies, Inc. SM4450 QRD";
>>>> +    compatible = "qcom,sm4450-qrd", "qcom,sm4450";
>>>> +
>>>> +    aliases { };
>>>> +
>>>> +    chosen {
>>>> +        bootargs = "console=hvc0 earlycon=hvc0 hvc_dcc.enable=1 cpuidle.off=1";
>>>
>>> No earlycon, no hvc.enable (there is no such parameter), no cpuidle.off
>>> (again don't add fake stuff). So the only suitable argument is console,
>>> but this should be actually used via stdout path, although it seems
>>> there is no device node for such usage?
>> hvc totally comes from Qualcomm downstream and all the Gunyah
>> shenanigans..
>>
>> Tengfei, please ensure the patches are tested against linux-next
>> with no additional changes or modules, with a clean Linux userspace
>> (or at least a ramdisk).
>>
>> Konrad
> Hi Konrad,
> All these patches are tesed on linux-next, and get DCC console.
> For support this test, I did a temporal for enable CONFIG_HVC_DCC(this change haven't push to upstream).
So what you've said is that you've not tested against linux-next + this patchset.

You're supposed to `git checkout linux-next/master && (pick the series
you're sending)` and test just that. No less, no more. Preferably with
the upstream arm64 defconfig.

Konrad



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux