This patch series adds the relevant phy and controller configurations for enabling USB2 on IPQ5332 v6: Binding and dts:- Dropped the qcom,dwc3.yaml patch as it has been picked up for linux-next Add const to compatible, vdd-supply Move nodes per register address Driver:- Add vdd-supply Cleanup error paths in probe with dev_err_probe v5: Binding and dts:- Fix email id Removed 'Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>' as had to change bindings file to be able to use generic phy instead of usb-phy Driver:- Remove unused definition Use generic phy instead of usb-phy v4: Binding and dts:- Change node name (bindings & dts) Driver:- Remove unused enum static const for '.data' Error handling for devm_clk_get v3: Fix bindings file based on review comments v1: Cleanup DTS Combine driver, kconfig and makefile patches Remove unused functions from M31 driver Drop the clock driver changes Varadarajan Narayanan (5): dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy phy: qcom-m31: Introduce qcom,m31 USB phy driver arm64: dts: qcom: ipq5332: Add USB related nodes arm64: dts: qcom: ipq5332: Enable USB arm64: defconfig: Enable M31 USB phy driver .../bindings/phy/qcom,ipq5332-usb-hsphy.yaml | 59 +++++ arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts | 23 ++ arch/arm64/boot/dts/qcom/ipq5332.dtsi | 55 +++++ arch/arm64/configs/defconfig | 1 + drivers/phy/qualcomm/Kconfig | 11 + drivers/phy/qualcomm/Makefile | 1 + drivers/phy/qualcomm/phy-qcom-m31.c | 248 +++++++++++++++++++++ 7 files changed, 398 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-hsphy.yaml create mode 100644 drivers/phy/qualcomm/phy-qcom-m31.c -- 2.7.4
