On Tue, Jul 25, 2023 at 11:02:26AM -0700, Douglas Anderson wrote:
> The Qualcomm QSPI driver appears to require that any reads using DMA
> are a mutliple of 4 bytes. If this isn't true then the controller will
> clobber any extra bytes in memory following the last word. Let's
> detect this and falback to PIO.
>
> This fixes problems reported by slub_debug=FZPUA, which would complain
> about "kmalloc Redzone overwritten". One such instance said:
>
> 0xffffff80c29d541a-0xffffff80c29d541b @offset=21530. First byte 0x0 instead of 0xcc
> Allocated in mtd_kmalloc_up_to+0x98/0xac age=36 cpu=3 pid=6658
>
> Tracing through what was happening I saw that, while we often did DMA
> tranfers of 0x1000 bytes, sometimes we'd end up doing ones of 0x41a
> bytes. Those 0x41a byte transfers were the problem.
>
> NOTE: a future change will enable the SPI "mem ops" to help avoid this
> case, but it still seems good to add the extra check in the transfer.
>
> Fixes: b5762d95607e ("spi: spi-qcom-qspi: Add DMA mode support")
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Regards,
Bjorn
