Use id-gpios and vbus-gpios instead.
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
Reviewed-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Acked-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 4 ++--
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index fffdb7bbf889..0c38f7b51763 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -43,12 +43,12 @@ cpus_fixed_vproc1: regulator-vproc-buck1 {
extcon_usb: extcon_iddig {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
};
extcon_usb1: extcon_iddig1 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
};
usb_p0_vbus: regulator-usb-p0-vbus {
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 5122963d8743..607d65ddba9e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -41,7 +41,7 @@ hdmi_connector_in: endpoint {
extcon_usb: extcon_iddig {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pio 16 GPIO_ACTIVE_HIGH>;
};
usb_p1_vbus: regulator@0 {
--
2.34.1
