Add PLL configuration for MSM8976 SoC, this SoC offers 3 HFPLL.
Small cluster offers two presets for 652-902Mhz range and 902Mhz-1.47Ghz.
For simplicity only add second range as smaller frequencies can be obtained
via apcs divider or safe parent this also saves us
a hassle of reconfiguring VCO bit and config_val.
A72 and CCI cluster only use single frequency range with their
outputs/post_dividers/vco_bits being static.
Signed-off-by: Adam Skladowski <a39.skl@xxxxxxxxx>
---
drivers/clk/qcom/hfpll.c | 54 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/drivers/clk/qcom/hfpll.c b/drivers/clk/qcom/hfpll.c
index ec18bc8f0089..a9c4c77e0f50 100644
--- a/drivers/clk/qcom/hfpll.c
+++ b/drivers/clk/qcom/hfpll.c
@@ -32,8 +32,62 @@ static const struct hfpll_data hdata = {
.max_rate = 2900000000UL,
};
+static const struct hfpll_data msm8976_a53 = {
+ .mode_reg = 0x00,
+ .l_reg = 0x04,
+ .m_reg = 0x08,
+ .n_reg = 0x0c,
+ .user_reg = 0x10,
+ .config_reg = 0x14,
+ .config_val = 0x341600,
+ .status_reg = 0x1c,
+ .lock_bit = 16,
+
+ .l_val = 0x35,
+ .user_val = 0x109,
+ .min_rate = 902400000UL,
+ .max_rate = 1478400000UL,
+};
+
+static const struct hfpll_data msm8976_a72 = {
+ .mode_reg = 0x00,
+ .l_reg = 0x04,
+ .m_reg = 0x08,
+ .n_reg = 0x0c,
+ .user_reg = 0x10,
+ .config_reg = 0x14,
+ .config_val = 0x4e0405d,
+ .status_reg = 0x1c,
+ .lock_bit = 16,
+
+ .l_val = 0x3e,
+ .user_val = 0x100109,
+ .min_rate = 940800000UL,
+ .max_rate = 1843200000UL,
+};
+
+static const struct hfpll_data msm8976_cci = {
+ .mode_reg = 0x00,
+ .l_reg = 0x04,
+ .m_reg = 0x08,
+ .n_reg = 0x0c,
+ .user_reg = 0x10,
+ .config_reg = 0x14,
+ .config_val = 0x141400,
+ .status_reg = 0x1c,
+ .lock_bit = 16,
+
+ .l_val = 0x20,
+ .user_val = 0x100109,
+ .min_rate = 556800000UL,
+ .max_rate = 902400000UL,
+};
+
static const struct of_device_id qcom_hfpll_match_table[] = {
{ .compatible = "qcom,hfpll", &hdata },
+ { .compatible = "qcom,hfpll-msm8976-a53", &msm8976_a53 },
+ { .compatible = "qcom,hfpll-msm8976-a72", &msm8976_a72 },
+ { .compatible = "qcom,hfpll-msm8976-cci", &msm8976_cci },
{ }
};
MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);
--
2.41.0
