[PATCH v5 3/5] arm64: dts: qcom: ipq5332: Add tsens node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



IPQ5332 has tsens v2.3.3 peripheral. This patch adds the tsense
node with nvmem cells for calibration data.

Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
---
[v5]:
	No changes.
[v4]:
	No changes.
[v3]:
	Reordered device nodes according to the address.
[v2]:
	Included qfprom nodes only for available sensors and removed
	the offset suffix.

 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 66 +++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 8bfc2db44624..026f99fda00c 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -150,6 +150,46 @@ qfprom: efuse@a4000 {
 			reg = <0x000a4000 0x721>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			s11: s11@3a5 {
+				reg = <0x3a5 0x1>;
+				bits = <4 4>;
+			};
+
+			s12: s12@3a6 {
+				reg = <0x3a6 0x1>;
+				bits = <0 4>;
+			};
+
+			s13: s13@3a6 {
+				reg = <0x3a6 0x1>;
+				bits = <4 4>;
+			};
+
+			s14: s14@3ad {
+				reg = <0x3ad 0x2>;
+				bits = <7 4>;
+			};
+
+			s15: s15@3ae {
+				reg = <0x3ae 0x1>;
+				bits = <3 4>;
+			};
+
+			tsens_mode: mode@3e1 {
+				reg = <0x3e1 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_base0: base0@3e1 {
+				reg = <0x3e1 0x2>;
+				bits = <3 10>;
+			};
+
+			tsens_base1: base1@3e2 {
+				reg = <0x3e2 0x2>;
+				bits = <5 10>;
+			};
 		};
 
 		rng: rng@e3000 {
@@ -159,6 +199,32 @@ rng: rng@e3000 {
 			clock-names = "core";
 		};
 
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq5332-tsens";
+			reg = <0x4a9000 0x1000>,
+			      <0x4a8000 0x1000>;
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base0>,
+				      <&tsens_base1>,
+				      <&s11>,
+				      <&s12>,
+				      <&s13>,
+				      <&s14>,
+				      <&s15>;
+			nvmem-cell-names = "mode",
+					   "base0",
+					   "base1",
+					   "s11",
+					   "s12",
+					   "s13",
+					   "s14",
+					   "s15";
+			interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			#qcom,sensors = <5>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5332-tlmm";
 			reg = <0x01000000 0x300000>;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux