[PATCH 1/1] soundwire: use devm_clk_get_enabled() in qcom_swrm_probe()

[Yuanjun Gong <ruc_gongyuanjun@xxxxxxx>]

in qcom_swrm_probe(), the return value of function
clk_prepare_enable() should be checked, since it may fail.
using devm_clk_get_enabled() instead of devm_clk_get() and
clk_prepare_enable() can avoid this problem.

Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@xxxxxxx>
---
 drivers/soundwire/qcom.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index 7970fdb27ba0..04bc917b7a70 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -1549,14 +1549,12 @@ static int qcom_swrm_probe(struct platform_device *pdev)
 		goto err_init;
 	}
 
-	ctrl->hclk = devm_clk_get(dev, "iface");
+	ctrl->hclk = devm_clk_get_enabled(dev, "iface");
 	if (IS_ERR(ctrl->hclk)) {
 		ret = PTR_ERR(ctrl->hclk);
 		goto err_init;
 	}
 
-	clk_prepare_enable(ctrl->hclk);
-
 	ctrl->dev = dev;
 	dev_set_drvdata(&pdev->dev, ctrl);
 	mutex_init(&ctrl->port_lock);
@@ -1570,7 +1568,7 @@ static int qcom_swrm_probe(struct platform_device *pdev)
 
 	ret = qcom_swrm_get_port_config(ctrl);
 	if (ret)
-		goto err_clk;
+		goto err_init;
 
 	params = &ctrl->bus.params;
 	params->max_dr_freq = DEFAULT_CLK_FREQ;
@@ -1598,7 +1596,7 @@ static int qcom_swrm_probe(struct platform_device *pdev)
 					"soundwire", ctrl);
 	if (ret) {
 		dev_err(dev, "Failed to request soundwire irq\n");
-		goto err_clk;
+		goto err_init;
 	}
 
 	ctrl->wake_irq = of_irq_get(dev->of_node, 1);
@@ -1617,7 +1615,7 @@ static int qcom_swrm_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(dev, "Failed to register Soundwire controller (%d)\n",
 			ret);
-		goto err_clk;
+		goto err_init;
 	}
 
 	qcom_swrm_init(ctrl);
@@ -1647,8 +1645,6 @@ static int qcom_swrm_probe(struct platform_device *pdev)
 
 err_master_add:
 	sdw_bus_master_delete(&ctrl->bus);
-err_clk:
-	clk_disable_unprepare(ctrl->hclk);
 err_init:
 	return ret;
 }
-- 
2.17.1