On 20/07/2023 10:45, Sridharan S N wrote: > Document the below listed (Reference Design Platform) RDP boards based on IPQ9574 > family of SoCs. > > AL02-C3 - rdp437 > AL02-C7 - rdp433-mht-phy > AL02-C10 - rdp433-mht-switch > AL02-C11 - rdp467 > AL02-C12 - rdp455 > AL02-C13 - rdp459 > AL02-C15 - rdp457 > AL02-C16 - rdp456 > AL02-C17 - rdp469 > AL02-C19 - rdp461 > AL03-C2 - rdp458 > > Signed-off-by: Sridharan S N <quic_sridsn@xxxxxxxxxxx> > --- > .../devicetree/bindings/arm/qcom.yaml | 20 +++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml > index dd66fd872c31..d992261da691 100644 > --- a/Documentation/devicetree/bindings/arm/qcom.yaml > +++ b/Documentation/devicetree/bindings/arm/qcom.yaml > @@ -89,10 +89,20 @@ description: | > adp > ap-al01-c1 > ap-al02-c2 > + ap-al02-c3 > ap-al02-c6 > ap-al02-c7 > ap-al02-c8 > ap-al02-c9 > + ap-al02-c10 > + ap-al02-c11 > + ap-al02-c12 > + ap-al02-c13 > + ap-al02-c15 > + ap-al02-c16 > + ap-al02-c17 > + ap-al02-c19 Why? I asked once, but there was no feedback from Qualcomm. Why do we need to do this? What's the point? > + ap-al03-c2 > ap-mi01.2 > ap-mi01.3 > ap-mi01.6 > @@ -365,10 +375,20 @@ properties: > - enum: > - qcom,ipq9574-ap-al01-c1 > - qcom,ipq9574-ap-al02-c2 > + - qcom,ipq9574-ap-al02-c3 > - qcom,ipq9574-ap-al02-c6 > - qcom,ipq9574-ap-al02-c7 > - qcom,ipq9574-ap-al02-c8 > - qcom,ipq9574-ap-al02-c9 > + - qcom,ipq9574-ap-al02-c10 > + - qcom,ipq9574-ap-al02-c11 > + - qcom,ipq9574-ap-al02-c12 > + - qcom,ipq9574-ap-al02-c13 > + - qcom,ipq9574-ap-al02-c15 > + - qcom,ipq9574-ap-al02-c16 > + - qcom,ipq9574-ap-al02-c17 > + - qcom,ipq9574-ap-al02-c19 This looks fake. Sorry, but these boards have no differences. Best regards, Krzysztof
