From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx> Use qcom_scm_io_update_field() function introduced in the commit 1f899e6997bb ("firmware: qcom_scm: provide a read-modify-write function"). Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Signed-off-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx> Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx> --- Changes in V5: - Dropped the ununecessary paranthesis - Updated the commit message to indicate the commit ID in which qcom_scm_io_update_field is introduced instead of simply mentioning the "last commit" drivers/pinctrl/qcom/pinctrl-msm.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c index 2585ef2b2793..5ecde5bea38b 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.c +++ b/drivers/pinctrl/qcom/pinctrl-msm.c @@ -1040,6 +1040,7 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type) const struct msm_pingroup *g; unsigned long flags; bool was_enabled; + u32 mask; u32 val; if (msm_gpio_needs_dual_edge_parent_workaround(d, type)) { @@ -1074,23 +1075,20 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type) * With intr_target_use_scm interrupts are routed to * application cpu using scm calls. */ + mask = GENMASK(2, 0) << g->intr_target_bit; if (pctrl->intr_target_use_scm) { u32 addr = pctrl->phys_base[0] + g->intr_target_reg; int ret; - qcom_scm_io_readl(addr, &val); - - val &= ~(7 << g->intr_target_bit); - val |= g->intr_target_kpss_val << g->intr_target_bit; - - ret = qcom_scm_io_writel(addr, val); + val = g->intr_target_kpss_val << g->intr_target_bit; + ret = qcom_scm_io_update_field(addr, mask, val); if (ret) dev_err(pctrl->dev, "Failed routing %lu interrupt to Apps proc", d->hwirq); } else { val = msm_readl_intr_target(pctrl, g); - val &= ~(7 << g->intr_target_bit); + val &= ~mask; val |= g->intr_target_kpss_val << g->intr_target_bit; msm_writel_intr_target(val, pctrl, g); } -- 2.34.1