The GPU_CC block on SM6115 is powered by the VDD_CX rail. We need to
ensure that it's enabled to prevent unwanted power collapse.
Enable runtime PM to keep the power flowing only when necessary.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
drivers/clk/qcom/gpucc-sm6115.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/qcom/gpucc-sm6115.c b/drivers/clk/qcom/gpucc-sm6115.c
index ac048f7973d0..6fb84492d292 100644
--- a/drivers/clk/qcom/gpucc-sm6115.c
+++ b/drivers/clk/qcom/gpucc-sm6115.c
@@ -7,6 +7,7 @@
#include <linux/clk-provider.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <dt-bindings/clock/qcom,sm6115-gpucc.h>
@@ -442,10 +443,21 @@ MODULE_DEVICE_TABLE(of, gpu_cc_sm6115_match_table);
static int gpu_cc_sm6115_probe(struct platform_device *pdev)
{
struct regmap *regmap;
+ int ret;
+
+ ret = devm_pm_runtime_enable(&pdev->dev);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret)
+ return ret;
regmap = qcom_cc_map(pdev, &gpu_cc_sm6115_desc);
- if (IS_ERR(regmap))
+ if (IS_ERR(regmap)) {
+ pm_runtime_put(&pdev->dev);
return PTR_ERR(regmap);
+ }
clk_alpha_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
clk_alpha_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
@@ -465,7 +477,10 @@ static int gpu_cc_sm6115_probe(struct platform_device *pdev)
qcom_branch_set_clk_en(regmap, 0x1078);
qcom_branch_set_clk_en(regmap, 0x1060);
- return qcom_cc_really_probe(pdev, &gpu_cc_sm6115_desc, regmap);
+ ret = qcom_cc_really_probe(pdev, &gpu_cc_sm6115_desc, regmap);
+ pm_runtime_put(&pdev->dev);
+
+ return ret;
}
static struct platform_driver gpu_cc_sm6115_driver = {
--
2.41.0
