[PATCH v2 6/7] PCI: epf-mhi: Use iATU for small transfers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For transfers below 4K, let's use iATU since using eDMA for such small
transfers is not efficient. This is mainly due to the fact that setting
up a eDMA transfer and waiting for its completion adds some latency. This
latency is negligible for large transfers but not for the smaller ones.

With this hack, there is an increase in ~50Mbps throughput on both MHI UL
(Uplink) and DL (Downlink) channels.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 drivers/pci/endpoint/functions/pci-epf-mhi.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/pci/endpoint/functions/pci-epf-mhi.c b/drivers/pci/endpoint/functions/pci-epf-mhi.c
index dc6692e2c623..a8feb03061aa 100644
--- a/drivers/pci/endpoint/functions/pci-epf-mhi.c
+++ b/drivers/pci/endpoint/functions/pci-epf-mhi.c
@@ -288,6 +288,9 @@ static int pci_epf_mhi_edma_read(struct mhi_ep_cntrl *mhi_cntrl, u64 from,
 	dma_addr_t dst_addr;
 	int ret;
 
+	if (size < SZ_4K)
+		return pci_epf_mhi_iatu_read(mhi_cntrl, from, to, size);
+
 	mutex_lock(&epf_mhi->lock);
 
 	config.direction = DMA_DEV_TO_MEM;
@@ -354,6 +357,9 @@ static int pci_epf_mhi_edma_write(struct mhi_ep_cntrl *mhi_cntrl, void *from,
 	dma_addr_t src_addr;
 	int ret;
 
+	if (size < SZ_4K)
+		return pci_epf_mhi_iatu_write(mhi_cntrl, from, to, size);
+
 	mutex_lock(&epf_mhi->lock);
 
 	config.direction = DMA_MEM_TO_DEV;
-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux