[PATCH v1 0/2] Add support for vibrator in multiple PMICs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add SW support for the vibrator module inside PMI632, PM7250B, PM7325B, PM7550BA.
It is very similar to the vibrator module inside PM8916 which is supported in
pm8xxx-vib driver but just the drive amplitude is controlled with 2 registers,
and the register base offset in each PMIC is different.

Fenglin Wu (2):
  dt-bindings: input: qcom,pm8xxx-vib: add more PMIC support
  Input: pm8xxx-vib - Add support for more PMICs

 .../bindings/input/qcom,pm8xxx-vib.yaml       |  4 ++
 drivers/input/misc/pm8xxx-vibrator.c          | 49 +++++++++++++++++++
 2 files changed, 53 insertions(+)

-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux