Hi Rajendra, On 08/07/15 10:47, Rajendra Nayak wrote:
Changes since RFC: * Added support for 8916 and 8084 * Based off the latest nvmem framework patches [1] * Minor review fixes for comments mostly from Lina ** I have also added irq support using the hardware trip point support series [2]. Will post that out seperately. This is an attempt to have a single TSENS driver for the different versions of the TSENS IP that exist, on different qcom msm/apq SoCs' Support is added for msm8916, msm8960 and msm8974 families. Based on top of the latest nvmem framework patches [2] A lot of the work is based of original code from Stephen Boyd and Siddartha Mohanadoss. I have also picked some of what Narendran Rajan did in his attempt to upstream the support for 8960 family. I could not keep the original authorship on any of the patches because I ended up moving the code around quite a bit in an effort to have a single driver for the various devices. I would be glad to change the authorship for any of the patches if needed. [1] https://lkml.org/lkml/2015/6/22/609 [2] https://lkml.org/lkml/2015/5/20/472 Rajendra Nayak (8): thermal: qcom: tsens: Add a skeletal TSENS drivers thermal: qcom: tsens-8916: Add support for 8916 family of SoCs thermal: qcom: tsens-8974: Add support for 8974 family of SoCs thermal: qcom: tsens-8960: Add support for 8960 family of SoCs arm: dts: msm8974: Add thermal zones, tsens and eeprom nodes arm: dts: apq8064: Add thermal zones, tsens and eeprom nodes arm: dts: apq8084: Add thermal zones, tsens and eeprom nodes arm64: dts: msm8916: Add thermal zones, tsens and eeprom nodes Srinivas Kandagatla (1): clk: qcom: gcc-msm8960: add child devices support. .../devicetree/bindings/thermal/qcom-tsens.txt | 37 +++ arch/arm/boot/dts/qcom-apq8064.dtsi | 108 ++++++++ arch/arm/boot/dts/qcom-apq8084.dtsi | 105 ++++++++ arch/arm/boot/dts/qcom-msm8974.dtsi | 105 ++++++++ arch/arm64/boot/dts/qcom/msm8916.dtsi | 66 +++++ drivers/clk/qcom/gcc-msm8960.c | 4 +- drivers/thermal/Kconfig | 5 + drivers/thermal/Makefile | 1 + drivers/thermal/qcom/Kconfig | 10 + drivers/thermal/qcom/Makefile | 2 + drivers/thermal/qcom/tsens-8916.c | 107 ++++++++ drivers/thermal/qcom/tsens-8960.c | 291 +++++++++++++++++++++ drivers/thermal/qcom/tsens-8974.c | 239 +++++++++++++++++ drivers/thermal/qcom/tsens-common.c | 128 +++++++++ drivers/thermal/qcom/tsens.c | 209 +++++++++++++++ drivers/thermal/qcom/tsens.h | 69 +++++ 16 files changed, 1485 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt create mode 100644 drivers/thermal/qcom/Kconfig create mode 100644 drivers/thermal/qcom/Makefile create mode 100644 drivers/thermal/qcom/tsens-8916.c create mode 100644 drivers/thermal/qcom/tsens-8960.c create mode 100644 drivers/thermal/qcom/tsens-8974.c create mode 100644 drivers/thermal/qcom/tsens-common.c create mode 100644 drivers/thermal/qcom/tsens.c create mode 100644 drivers/thermal/qcom/tsens.h
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> NVMEM framework in now available in linux-next. Do you think we can get this in v4.3? --srini -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
