On 14.07.2023 15:02, Johan Hovold wrote: > Make the clock-rate debug printk more readable by using an equal sign > instead of a dash as separator between names and values and adding some > spaces: > > qcom_geni_serial 988000.serial: desired_rate = 1843200, clk_rate = 7372800, clk_div = 4 > > Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Konrad > drivers/tty/serial/qcom_geni_serial.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c > index 8be896dbaa88..753ac68d03a6 100644 > --- a/drivers/tty/serial/qcom_geni_serial.c > +++ b/drivers/tty/serial/qcom_geni_serial.c > @@ -1246,7 +1246,7 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, > goto out_restart_rx; > } > > - dev_dbg(port->se.dev, "desired_rate-%u, clk_rate-%lu, clk_div-%u\n", > + dev_dbg(port->se.dev, "desired_rate = %u, clk_rate = %lu, clk_div = %u\n", > baud * sampling_rate, clk_rate, clk_div); > > uport->uartclk = clk_rate;
