Re: [PATCH 11/14] scsi: ufs: host: Add support for parsing OPP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 12 Jul 2023 at 19:34, Manivannan Sadhasivam
<manivannan.sadhasivam@xxxxxxxxxx> wrote:
>
> On Wed, Jul 12, 2023 at 04:15:12PM +0300, Dmitry Baryshkov wrote:
> > On 12/07/2023 13:32, Manivannan Sadhasivam wrote:
> > > OPP framework can be used to scale the clocks along with other entities
> > > such as regulators, performance state etc... So let's add support for
> > > parsing OPP from devicetree. OPP support in devicetree is added through
> > > the "operating-points-v2" property which accepts the OPP table defining
> > > clock frequency, regulator voltage, power domain performance state etc...
> > >
> > > Since the UFS controller requires multiple clocks to be controlled for
> > > proper working, devm_pm_opp_set_config() has been used which supports
> > > scaling multiple clocks through custom ufshcd_opp_config_clks() callback.
> > >
> > > It should be noted that the OPP support is not compatible with the old
> > > "freq-table-hz" property. So only one can be used at a time even though
> > > the UFS core supports both.
> > >
> > > Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > > ---
> > >   drivers/ufs/host/ufshcd-pltfrm.c | 116 +++++++++++++++++++++++++++++++
> > >   1 file changed, 116 insertions(+)
> > >
> > > diff --git a/drivers/ufs/host/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c
> > > index 0b7430033047..068c22378c88 100644
> > > --- a/drivers/ufs/host/ufshcd-pltfrm.c
> > > +++ b/drivers/ufs/host/ufshcd-pltfrm.c
> > > @@ -8,8 +8,10 @@
> > >    *        Vinayak Holikatti <h.vinayak@xxxxxxxxxxx>
> > >    */
> > > +#include <linux/clk.h>
> > >   #include <linux/module.h>
> > >   #include <linux/platform_device.h>
> > > +#include <linux/pm_opp.h>
> > >   #include <linux/pm_runtime.h>
> > >   #include <linux/of.h>
> > > @@ -17,6 +19,8 @@
> > >   #include "ufshcd-pltfrm.h"
> > >   #include <ufs/unipro.h>
> > > +#include <trace/events/ufs.h>
> > > +
> > >   #define UFSHCD_DEFAULT_LANES_PER_DIRECTION                2
> > >   static int ufshcd_parse_clock_info(struct ufs_hba *hba)
> > > @@ -205,6 +209,112 @@ static void ufshcd_init_lanes_per_dir(struct ufs_hba *hba)
> > >     }
> > >   }
> > > +static int ufshcd_opp_config_clks(struct device *dev, struct opp_table *opp_table,
> > > +                             struct dev_pm_opp *opp, void *data,
> > > +                             bool scaling_down)
> > > +{
> > > +   struct ufs_hba *hba = dev_get_drvdata(dev);
> > > +   struct list_head *head = &hba->clk_list_head;
> > > +   struct ufs_clk_info *clki;
> > > +   unsigned long freq;
> > > +   u8 idx = 0;
> > > +   int ret;
> > > +
> > > +   list_for_each_entry(clki, head, list) {
> > > +           if (!IS_ERR_OR_NULL(clki->clk)) {
> > > +                   freq = dev_pm_opp_get_freq_indexed(opp, idx++);
> > > +
> > > +                   /* Do not set rate for clocks having frequency as 0 */
> > > +                   if (!freq)
> > > +                           continue;
> >
> > Can we omit these clocks from the opp table? I don't think they serve any
> > purpose.
> >
>
> No, we cannot. OPP requires the clocks and opp-hz to be of same length. And we
> cannot omit those clocks as well since linux needs to gate control them.

Hmm, I thought we push the list of "interesting" clocks through
config->clock_names.

>
> > Maybe it would even make sense to move this function to drivers/opp then, as
> > it will be generic enough.
> >
>
> There is already a generic function available in OPP core. But we cannot use it
> as we need to skip setting 0 freq and that's not applicable in OPP core as
> discussed with Viresh offline.

Ack.

>
> - Mani
>
> > > +
> > > +                   ret = clk_set_rate(clki->clk, freq);
> > > +                   if (ret) {
> > > +                           dev_err(dev, "%s: %s clk set rate(%ldHz) failed, %d\n",
> > > +                                   __func__, clki->name, freq, ret);
> > > +                           return ret;
> > > +                   }
> > > +
> > > +                   trace_ufshcd_clk_scaling(dev_name(dev),
> > > +                           (scaling_down ? "scaled down" : "scaled up"),
> > > +                           clki->name, hba->clk_scaling.target_freq, freq);
> > > +           }
> > > +   }
> > > +
> > > +   return 0;
> > > +} > +
> > > +static int ufshcd_parse_operating_points(struct ufs_hba *hba)
> > > +{
> > > +   struct device *dev = hba->dev;
> > > +   struct device_node *np = dev->of_node;
> > > +   struct dev_pm_opp_config config = {};
> > > +   struct ufs_clk_info *clki;
> > > +   const char **clk_names;
> > > +   int cnt, i, ret;
> > > +
> > > +   if (!of_find_property(np, "operating-points-v2", NULL))
> > > +           return 0;
> > > +
> > > +   if (of_find_property(np, "freq-table-hz", NULL)) {
> > > +           dev_err(dev, "%s: operating-points and freq-table-hz are incompatible\n",
> > > +                    __func__);
> > > +           return -EINVAL;
> > > +   }
> > > +
> > > +   cnt = of_property_count_strings(np, "clock-names");
> > > +   if (cnt <= 0) {
> > > +           dev_err(dev, "%s: Missing clock-names\n",  __func__);
> > > +           return -ENODEV;
> > > +   }
> > > +
> > > +   /* OPP expects clk_names to be NULL terminated */
> > > +   clk_names = devm_kcalloc(dev, cnt + 1, sizeof(*clk_names), GFP_KERNEL);
> > > +   if (!clk_names)
> > > +           return -ENOMEM;
> > > +
> > > +   /*
> > > +    * We still need to get reference to all clocks as the UFS core uses
> > > +    * them separately.
> > > +    */
> > > +   for (i = 0; i < cnt; i++) {
> > > +           ret = of_property_read_string_index(np, "clock-names", i,
> > > +                                               &clk_names[i]);
> > > +           if (ret)
> > > +                   return ret;
> > > +
> > > +           clki = devm_kzalloc(dev, sizeof(*clki), GFP_KERNEL);
> > > +           if (!clki)
> > > +                   return -ENOMEM;
> > > +
> > > +           clki->name = devm_kstrdup(dev, clk_names[i], GFP_KERNEL);
> > > +           if (!clki->name)
> > > +                   return -ENOMEM;
> > > +
> > > +           if (!strcmp(clk_names[i], "ref_clk"))
> > > +                   clki->keep_link_active = true;
> > > +
> > > +           list_add_tail(&clki->list, &hba->clk_list_head);
> > > +   }
> > > +
> > > +   config.clk_names = clk_names,
> > > +   config.config_clks = ufshcd_opp_config_clks;
> > > +
> > > +   ret = devm_pm_opp_set_config(dev, &config);
> > > +   if (ret)
> > > +           return ret;
> > > +
> > > +   ret = devm_pm_opp_of_add_table(dev);
> > > +   if (ret) {
> > > +           dev_err(dev, "Failed to add OPP table: %d\n", ret);
> > > +           return ret;
> > > +   }
> > > +
> > > +   hba->use_pm_opp = true;
> > > +
> > > +   return 0;
> > > +}
> > > +
> > >   /**
> > >    * ufshcd_get_pwr_dev_param - get finally agreed attributes for
> > >    *                            power mode change
> > > @@ -371,6 +481,12 @@ int ufshcd_pltfrm_init(struct platform_device *pdev,
> > >     ufshcd_init_lanes_per_dir(hba);
> > > +   err = ufshcd_parse_operating_points(hba);
> > > +   if (err) {
> > > +           dev_err(dev, "%s: OPP parse failed %d\n", __func__, err);
> > > +           goto dealloc_host;
> > > +   }
> > > +
> > >     err = ufshcd_init(hba, mmio_base, irq);
> > >     if (err) {
> > >             dev_err(dev, "Initialization failed\n");
> >
> > --
> > With best wishes
> > Dmitry
> >
>
> --
> மணிவண்ணன் சதாசிவம்



-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux