Re: [PATCH 3/5] arm64: dts: qcom: qrb5165-rb5: add onboard USB-C redriver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12.07.2023 01:01, Dmitry Baryshkov wrote:
> On Wed, 12 Jul 2023 at 01:59, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>>
>> On 12.07.2023 00:39, Dmitry Baryshkov wrote:
>>> On 12/07/2023 00:36, Konrad Dybcio wrote:
>>>> On 9.07.2023 06:19, Dmitry Baryshkov wrote:
>>>>> Add the nb7vpq904m, onboard USB-C redriver / retimer.
>>>>>
>>>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
>>>>> ---
>>>> [...]
>>>>
>>>>> +            port@1 {
>>>>> +                reg = <1>;
>>>>> +
>>>>> +                redriver_phy_con_ss: endpoint {
>>>>> +                    remote-endpoint = <&usb_1_qmpphy_typec_mux_in>;
>>>>> +                    data-lanes = <0 1 2 3>;
>>>> That's USB+DP lines combined, or how does it work? I'm confused :/
>>>
>>> 4 generic purpose SS lanes, which can be purposed for USB or for DP.
>> Okay, so my gut did better than my brain.
>>
>> Other than that, I'm reading the bindings and it looks like ports 0 and
>> 1 may possibly be swapped?
> 
> Yes. But if I get schematics right, the lanes are not swapped in this case.
I'm not talking about the 0123-3210 swap, but rather in/out being swapped.
Unless I'm reading the bindings wrong (or they may be written in a
confusing way).

Konrad
> 
>>
>> Konrad
>>>
>>>>
>>>> Konrad
>>>>> +                };
>>>>> +            };
>>>>> +
>>>>> +            port@2 {
>>>>> +                reg = <2>;
>>>>> +
>>>>> +                redriver_usb_con_sbu: endpoint {
>>>>> +                    remote-endpoint = <&pm8150b_typec_sbu_out>;
>>>>> +                };
>>>>> +            };
>>>>> +        };
>>>>> +    };
>>>>>   };
>>>>>     &mdss {
>>>>> @@ -1294,7 +1334,7 @@ &usb_1_qmpphy {
>>>>>   };
>>>>>     &usb_1_qmpphy_typec_mux_in {
>>>>> -    remote-endpoint = <&pm8150b_typec_mux_out>;
>>>>> +    remote-endpoint = <&redriver_phy_con_ss>;
>>>>>   };
>>>>>     &usb_2 {
>>>>> @@ -1382,7 +1422,15 @@ pm8150b_role_switch_out: endpoint {
>>>>>               port@1 {
>>>>>                   reg = <1>;
>>>>>                   pm8150b_typec_mux_out: endpoint {
>>>>> -                    remote-endpoint = <&usb_1_qmpphy_typec_mux_in>;
>>>>> +                    remote-endpoint = <&redriver_usb_con_ss>;
>>>>> +                };
>>>>> +            };
>>>>> +
>>>>> +            port@2 {
>>>>> +                reg = <2>;
>>>>> +
>>>>> +                pm8150b_typec_sbu_out: endpoint {
>>>>> +                    remote-endpoint = <&redriver_usb_con_sbu>;
>>>>>                   };
>>>>>               };
>>>>>           };
>>>
> 
> 
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux