Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 20 ++++++--------------
1 file changed, 6 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index d522dea65ba7..ee6a16ed0a91 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2169,7 +2169,7 @@ ufs_mem_hc: ufshc@1d84000 {
"jedec,ufs-2.0";
reg = <0 0x01d84000 0 0x3000>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
+ phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
#reset-cells = <1>;
@@ -2213,10 +2213,8 @@ ufs_mem_hc: ufshc@1d84000 {
ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sm8250-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01d87000 0 0x1000>;
+
clock-names = "ref",
"ref_aux";
clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -2224,16 +2222,10 @@ ufs_mem_phy: phy@1d87000 {
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
- status = "disabled";
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x16c>,
- <0 0x01d87600 0 0x200>,
- <0 0x01d87c00 0 0x200>,
- <0 0x01d87800 0 0x16c>,
- <0 0x01d87a00 0 0x200>;
- #phy-cells = <0>;
- };
+ #phy-cells = <0>;
+
+ status = "disabled";
};
cryptobam: dma-controller@1dc4000 {
--
2.39.2
