Re: [PATCH 5/6] arm64: dts: qcom: ipq5332: Add thermal zone nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 7/10/2023 4:53 PM, Dmitry Baryshkov wrote:
On 10/07/2023 13:37, Praveenkumar I wrote:
This patch adds thermal zone nodes for sensors present in
IPQ5332.

Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/ipq5332.dtsi | 72 +++++++++++++++++++++++++++
  1 file changed, 72 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index a1e3527178c0..8b276aeca53e 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -527,4 +527,76 @@ timer {
                   <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,                    <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
      };
+
+    thermal-zones {
+        rfa-0-thermal{
+            polling-delay-passive = <0>;
+            polling-delay = <0>;
+            thermal-sensors = <&tsens 11>;
+
+            trips {
+                rfa-0-critical {
+                    temperature = <125000>;
+                    hysteresis = <1000>;
+                    type = "critical";
+                };
+            };
+        };
+
+        rfa-1-thermal {
+            polling-delay-passive = <0>;
+            polling-delay = <0>;
+            thermal-sensors = <&tsens 12>;
+
+            trips {
+                rfa-1-critical {
+                    temperature = <125000>;
+                    hysteresis = <1000>;
+                    type = "critical";
+                };
+            };
+        };
+
+        misc-thermal {
+            polling-delay-passive = <0>;
+            polling-delay = <0>;
+            thermal-sensors = <&tsens 13>;
+
+            trips {
+                misc-critical {
+                    temperature = <125000>;
+                    hysteresis = <1000>;
+                    type = "critical";
+                };
+            };
+        };
+
+        cpu-top-thermal {
+            polling-delay-passive = <0>;
+            polling-delay = <0>;
+            thermal-sensors = <&tsens 14>;
+
+            trips {
+                cpu-top-critical {
+                    temperature = <125000>;
+                    hysteresis = <1000>;
+                    type = "critical";
+                };
+            };

Could you please add a passive cooling devices for the CPU?
Sure, will add the passive trip.

+        };
+
+        top-glue-thermal {
+            polling-delay-passive = <0>;
+            polling-delay = <0>;
+            thermal-sensors = <&tsens 15>;
+
+            trips {
+                top-glue-critical {
+                    temperature = <125000>;
+                    hysteresis = <1000>;
+                    type = "critical";
+                };
+            };
+        };
+    };
  };

--
Thanks,
Praveenkumar



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux