Here we propose this patch series to add support in PCI endpoint
driver to wake up host from D3 states.
As endpoint cannot send any data/MSI when the D-state is in
D3cold or D3hot. Endpoint needs to bring the device back to D0
to send any kind of data.
For this endpoint needs to send inband PME the device is in D3 state or
toggle wake when the device is D3 cold and vaux is not supplied.
As EPF doestn't know the D-state of the PCI, added a notify op whenever
device state changes.
Based on the D-state the EPF driver decides to wake host either by
toggling wake or by sending PME.
When the MHI state is in M3 MHI driver will wakeup the host using the
wakeup op.
Changes from v2:
- Addressed review comments made by mani.
Changes from v1:
- Moved from RFC patch to regular patch
- Inclueded EPF patch and added a new op patch to notify D-state change
*** BLURB HERE ***
Krishna chaitanya chundru (9):
PCI: endpoint: Add dstate change notifier support
PCI: qcom-ep: Add support for D-state change notification
PCI: qcom-ep: Update the D-state log
PCI: epf-mhi: Add support for handling D-state notify from EPC
PCI: endpoint: Add wakeup host API to EPC core
pci: dwc: Add wakeup host op to pci_epc_ops
PCI: qcom-ep: Add wake up host op to dw_pcie_ep_ops
PCI: epf-mhi: Add wakeup host op
bus: mhi: ep: wake up host is the MHI state is in M3
Documentation/PCI/endpoint/pci-endpoint.rst | 11 +++++
drivers/bus/mhi/ep/main.c | 28 ++++++++++++
drivers/pci/controller/dwc/pcie-designware-ep.c | 12 +++++
drivers/pci/controller/dwc/pcie-designware.h | 3 ++
drivers/pci/controller/dwc/pcie-qcom-ep.c | 36 ++++++++++++++-
drivers/pci/endpoint/functions/pci-epf-mhi.c | 28 ++++++++++++
drivers/pci/endpoint/pci-epc-core.c | 58 +++++++++++++++++++++++++
include/linux/mhi_ep.h | 4 ++
include/linux/pci-epc.h | 12 +++++
include/linux/pci-epf.h | 1 +
10 files changed, 192 insertions(+), 1 deletion(-)
--
2.7.4
