Re: [PATCH v1 0/6] arm64: qcom: sa8775p: add support for PCIe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jul 06, 2023 at 08:39:54AM +0200, Krzysztof Kozlowski wrote:
> On 05/07/2023 10:46, Manivannan Sadhasivam wrote:
> > On Wed, Jul 05, 2023 at 01:47:05PM +0530, Mrinmay Sarkar wrote:
> >> Update the relavent DT bindings for PCIe, add new config to the phy
> >> driver add pcie and phy nodes to the .dtsi file and enable then in 
> >> board .dts file for the sa8775p-ride platform.
> >>
> >> Mrinmay Sarkar (6):
> >>   dt-bindings: PCI: qcom: Add sa8775p compatible
> >>   dt-bindings: phy: qcom,qmp: Add sa8775p QMP PCIe PHY
> >>   PCI: qcom: Add support for sa8775p SoC
> >>   phy: qcom-qmp-pcie: add support for sa8775p
> >>   arm64: dts: qcom: sa8775p: Add pcie0 and pcie1 nodes
> >>   arm64: dts: qcom: sa8775p-ride: enable pcie nodes
> > 
> > Please note that the dts patches should come before driver patches.
> >
> 
> Why? DTS is always independent thus usually put at the end of patchset
> or better separate. It is the first time I hear that DTS should be
> before driver.
> 

This is what I was suggested by Rob during my initial days and I've been
following this pattern since then. If that's not the case, I have no issues.

- Mani

> Best regards,
> Krzysztof
> 

-- 
மணிவண்ணன் சதாசிவம்



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux